Removing The Detergent Dispenser Outlet Hose; Removing The Siphon Break Hose; Removing The Drain Sump; Removing The Hose Between The Drain Pump And The Drain Hose Coupler - Electrolux 6000 series Service Manual

Removing the detergent dispenser outlet
hose:
1. Disconnect the washer from the electrical supply
and remove the top panel.
2. Release the overflow/vent tube and slide it back.
3. Loosen the (2) clamps, one on each end, and slide
the hose off.

Removing the siphon break hose:

1. Disconnect the washer from the electrical supply
and remove the top panel.
2. Release the (2) clamps, one on each end, and slide
the hose off.

Removing the drain sump:

1. Disconnect the washer from the electrical supply
and remove the front panel.
2. Loosen the clamp at the tub.
n
3. Release the clamp at the pump.
4. Slide the hose off the tub and pump to remove the
sump.
Removing the hose between the drain
pump and the drain hose coupler:
1. Disconnect the washer from the electrical supply,
remove the top panel and the front panel.
Note: There will be water in the pump and hose.
88
a