Removing The Front Panel; Removing The Drain Pump Assembly - Electrolux 6000 series Service Manual

Removing the front panel:

1. Disconnect the washer from the electrical supply
and release the console.
2. Release the bellows from the front panel and remove
the (2) screws holding the door safety switch
assembly to the front panel.
3. On select models, disconnect the wires from the
light switch.
4. Raise the front of the washer and remove the (4)
screws securing the front panel to the washer base.
5. Remove the (4) screws securing the top of the panel.
6. Lift up and out on the front panel to disengage it from
the (4) nylon pins, two in the front of each side panel,
and lift the front panel off.

Removing the drain pump assembly:

1. Disconnect the washer from the electrical supply
and remove the front panel.
Note: Some water will be left in the hoses and
pump.
2. Disconnect the inlet sump from the pump.
3. Disconnect the outlet hose from the pump.
75