Table of Contents
Advertisement
SECTION B - Washer & Dryer 15"
Drawer
Pedestal
Instructions
IMPORTANT: Read and save these
instructions.
This kit is intended to be installed by
persons having electrical and
mechanical training and a level of
knowledge considered acceptable
in the appliance repair trade.
Your safety and the safety of others are very
important. Many important safety messages
are provided in these instructions and on
your appliance. Always read and obey all
safety messages.
WARN I NG
EXCESSIVE WEIGHT HAZARD
Two or more people may be required to move and
install the washer & dryer onto pedestals.
Failure to comply may cause back or other injury.
Tools needed:
level
9/16" open end wrench
#2 Phillips screwdriver
Washer/Dryer Installation Kit
14 - #10 x 1/2" Screws
2 – Spacer Plates (Washer)
Picture 1
Installation
2 - Rear Brackets (Washer)
(Washer / Dryer)
2 - Rear Brackets (Dryer)
2 - Front Brackets
(Washer / Dryer)
WASHER INSTALLATION
1. Remove the washer installation hardware from the
plastic bag as shown in Picture 1.
2. Attach the rear brackets to the pedestal with four
#10 screws (2 per bracket) as shown in Picture 2.
Do not remove this foam.
Picture 2
3. Attach the front brackets and spacer plates to the
pedestal with four #10 screws (2 per bracket) as shown
in Picture 3 and 4.
Picture 3
20
Front
Bracket
Spacer
Plate
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Table of Contents
