Section D - Operating Instructions (7000); Before Operating Your Washer; Operating Steps - Electrolux 6000 series Service Manual

SECTION D - WASHER OPERATING INSTRUCTIONS 7000 SERIES
Deep Clean
Sanitary
Heavy Duty
Normal
Perm Press
Delicates
Hand Wash
Spin Only

Before Operating Your Washer

Read your washer Owner's Guide. It has important safety
and warranty information. It also has many suggestions
for best washing results.
To reduce the risk of fire, electric shock
! WARNING
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your washer Owner's Guide before
operating this appliance.

Operating Steps

Read and follow "W ashing Procedures" in your
Owner'sGuide. It provides detailed information for
preparing the wash load and choosing control settings
to ensure best washing results.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Add laundry load to the wash drum.
5. Add laundry products to the dispenser.
• Detergent, bleach and fabric softener will be
dispensed at the proper time in the cycle.
• Slide safety latch to the right to open the dispenser
drawer.
• Add the recommended amount of a high
efficiency detergent to the
detergent compartment.
• If desired, add liquid chlorine bleach and liquid
fabric softener to the appropriate compartments.
Hot/Cold
Warm/Cold
Auto
Temp
Warm/Warm
Cold/Cold
Cold/Cold
Temperature
6. Select the appropriate cycle and settings for the load.
he
7. Select Delay Start to delay the beginning of the cycle
30
Delay
Start
Maximum
Stain Clean
Fast
Extra Rinse
Medium
Extended Spin
slow
Signal Volume
No Spin
Select
Options
Spin Speed
• Slowly close dispenser drawer.
• Any water remaining in the dispenser at the end
of the cycle is a result of siphoning action and
part of the normal operation.
• Turn the Cycle Selector knob in either direction
to select the cycle. The estimated cycle time will
be displayed.
• Suitable wash and rinse water temperatures, final
spin speed, options and soil level for each cycle
will automatically be displayed. See the Cycle
Selection Chart for more details.
• To change the settings, press the Temperature,
Spin Speed and Soil Level buttons.
• To select or delete an option, press Options, then,
while the indicator is blinking, press Select. The
indicator will light when the option has been
selected. It will no longer be lighted when the
option has been deleted.
• To provide the best care for your laundry, not every
setting or option is available with every cycle. If a
setting or option is not available, its indicator will
not light.
• Adjustments to the cycle will be remembered each
time that cycle is selected in the future. To return
to the factory settings, press Start/Pause and
Select at the same time and hold until a signal
sounds.
for up to 14 hours, if desired.
Heavy
Door Lock
Wash
Normal
Rinse
Light
Final Spin
Cancel
Soil Level
Start/Pause