Section I - Teardown; Removing The Detergent Drawer; Detergent Drawer Disassembly - Electrolux 6000 series Service Manual

Affinity horizontalaxis
Hide thumbs Also See for 6000 series:
Table of Contents

Advertisement

SECTION I - TEARDOWN

This section will describe how to remove components
from the washer. Unless stated, the procedure will be
the same on all models. Unless stated, reverse the
procedure to reinstall the component.
Always remove electrical power from the
washer when working in an area where electrical power
is present.
Note: Not all components are in all models.

Removing the detergent drawer:

1. Pull the drawer out until it hits the stop.
2. Push down on the release tab and pull the drawer
out.

Detergent drawer disassembly:

1. Remove the drawer from the washer.
2. The detergent, liquid bleach and fabric softener insert
lifts off. When reinstalling, be sure to seat it properly.
3. To remove the drawer front, release the three tabs
and pull the drawer front away from the body.
4. To remove the conveyer, release the conveyer from
the tabs and lift it off.
69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7000 series

Table of Contents