Control Lock; Estimated Cycle Time; Status Lights; Start/Pause - Electrolux 6000 series Service Manual

Control Lock

To avoid having someone accidentally start or stop the
washer, press Options and Select at the same time and
hold for 10 seconds until "LOC" is displayed alternately
with the estimated cycle time. To unlock the controls,
press Options and Select at the same time and hold 10
seconds until "LOC" is no longer displayed.

Estimated Cycle Time

The estimated total cycle time will be displayed when
the cycle is selected. The time may increase if water
pressure is low, oversudsing occurs or the load becomes
unbalanced. The approximate time remaining will be
displayed during the cycle.

Status Lights

The following will be displayed at the appropriate times
during the cycle:
• Door Lock
• Wash
• Rinse
• Final Spin

Start/Pause

Press Start/pause to start, pause or restart a cycle.
"PAU" will be displayed alternately with the estimated
time remaining when the cycle is paused.

Cancel

Press Cancel to stop the cycle.
28