Installation And Connection Instructions; Safety Information For The Installation - Electrolux Swissline SL EWF 1680 User Information

Installation and connection instructions

1

Safety information for the installation

• This washing machine cannot be built-in.
• Before using for the first time, check the appliance for damage sustained
while it was being transported. Do not under any circumstances connect
an appliance that is damaged. In the case of damage, please contact your
supplier.
• Before using for the first time, all parts of the transport lock must be re-
moved. Otherwise when spinning damage may be caused to the appli-
ance or to neighbouring units or furniture.
• Before using the appliance for the first time, splash protection must be
completed. (See "Removing the transit packaging".)
• Always plug the mains plug into a correctly installed shockproof socket.
• Permanent connection: a permanent connection must only be installed by
a trained electrician.
• Prior to using the appliance for the first time, ensure that the rated voltage
and type of supply on the rating plate match that of the supply where the
appliance is to be installed. The fuse rating is also to be found on the rat-
ing plate.
• If work on the plumbing is required for the proper connection of the wash-
ing machine to the water supply, this must be undertaken by a registered
plumber.
• If work on the electricity supply system is required for the proper connec-
tion of the washing machine to the electricity supply, this must be under-
taken by a registered electrician.
• The washing machine's cable must only be replaced by the Customer
Care Department or a registered electrician.
33