Remote Code; Remote Code - Panasonic KX-TG2770CS Operating Instructions Manual

✻✴✥✪✪✣✰✲✻✮M.❇m ✩5
Remote Operation from a Touch Tone Phone

Remote Code

(use either
The remote code prevents unauthorized people from accessing your unit and
listening to your messages. Choose any 2-digit number (00–99) for your remote
code.
The factory preset remote code is " 11 ". If you do not program your own remote
code, you can use "11".
Base Unit
1
Press [FUNCTION/EDIT] .
2
Scroll to " Initial setting " by pressing
[ ] or [ ] , then press [ ] .
3
Scroll to " Set answering " by pressing [ ]
or [ ] , then press [ ] .
4
Scroll to " Remote code " by pressing [ ] or
[ ] , then press [ ] .
5
Enter a 2-digit remote code (00–99) .
6
Press [ ] ( Save ).
• If 3 beeps sound, the entered remote code is the
same as the password (p. 57) and cannot be
used. Start again from step 5 and select another
code.
7
Press [STOP].
To check the remote code , repeat steps 1 to 4.
• The remote code is displayed. When finished, press [STOP] .
Handset
Press [CONF/FUNCTION] , and follow steps 2 to 5 above, using the
cordless handset. Press the soft key (
] ] _
or
Base Unit Handset
Initial setting
Set answering

Remote code

e.g. Entered 35.
Remote code
), then press [OFF] .
SA VE
)
:35
=Save
65