Incoming Call Tone - Panasonic KX-TG2770CS Operating Instructions Manual

✻✴✥✪✪✣✰✲✰o❍❅l❆ss✻❆l✥.❇m 5✦

Incoming Call Tone

During an intercom call, while using the Room Monitor feature, or while listening to
messages, you can be informed by two tones if a call arrives.
If you set incoming call tone to ON, this incoming call tone will be heard for as long
as the line rings. To bypass the incoming call tone, set it to OFF. To set the incoming
call tone to sound twice, set to "2". The factory preset is "2".
You can set the incoming call tone on the base unit or the cordless handset
separately.
1
Base unit: Press [FUNCTION/EDIT] .
Cordless handset: Press [CONF/FUNCTION]
2
Scroll to " Ringer setting " by pressing
[ ] or [ ] , then press [ ] .
3
Scroll to "Incoming call" by pressing [ ]
or [ ], then press [ ].
4
Select "On", "Off" or "2" by pressing [ ] or
[ ].
5
Base unit: Press [ ] (Save), then press [STOP].
Cordless handset: Press the soft key (
• You can also set the incoming call tone for the base unit, by using the cordless
handset. Perform the following steps:
(1) Press [CONF/FUNCTION] .
(2) Scroll to " Initial setting " by pressing [ ] or [ ] , then press [ ] .
(3) Scroll to " Set base unit " by pressing [ ] or [ ] , then press [ ] .
(4) Press [ ] at " Incoming call ".
(5) Select " On ", " Off " or " 2 " by pressing [ ] or [ ] , press the soft key (
and press [OFF] .
] ]
Special Features
Base Unit Handset
.
), then press [OFF].
SA VE
_
Ringer setting
Incoming call
Incoming call
tone :2
),
SA VE
53