Setting The Remote Code.75 - Panasonic KX-TC1891B Operating Instructions Manual

Setting the Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00-99).
The factory preset remote code is "11". If you do not program your own
remote code, you can use "11".
Make sure the unit is in the standby mode.
-j Press
\
FUNction/exit/chI.
2
Press (3 or ® repeatedly until the arrow
points to
"Program".
2 Press FWD/EDIT ®
(Yes
key).
4
Press B or S repeatedly until the arrow
points to
"TAD program".
5
Press FWD/EDIT (►)
(Yes
key).
•The base unit display shows the function menu
for the answering system.
6
Press
(T).
•The current setting is displayed on the base
unit.
7
Enter a remote code using a 2-digit
number (00-99).
8
Press FWD/EDIT ®
(Save
key).
•A beep sounds. _
•To return to the standby mode, press (FUNCTION/EXIT/CHl
Base unit display
• If 6 beeps sound during programming, a wrong key was pressed. Enter the
correct number.
To check the remote code
Repeat steps 1 to 6.
•The current remote code is displayed on the base unit. When finished, press
fFUNCTION/EXIT/CHj.
75