Panasonic KX-TG2770CS Operating Instructions Manual page 74

✻✴✥✪✪✣✰✲✼s❆❇❑l❊n❇o.❇m ✪✧
If the Following Appears on Your Display...
Display message
System is busy.
Please try again
later.
---Incomplete---
Tom Jones
098-765-4321
Directory full
(The name/number is
an example.)
Directory
No items stored
Denied
74
] ]
Cause & Remedy
• If radio communication between the cordless
handset and the base unit is partially impaired, this
display will be shown.
• If more than one unit is in use, such as when
conducting external/intercom calls or listening to
messages, you may not be able to use another unit.
Try again later.
• If you try to program with the base unit or cordless
handset and another user is listening to messages,
this display will be shown. Try again later.
• If 2 other users are listening to messages, or another
user is listening to messages while the Answering
System is responding to a call, you cannot access a
mailbox.
• When the displayed item is being sent to the
destination unit, the directory memory is full and the
transfer is stopped. If you tried to send all of the
items, the item displayed with " Incomplete " and
items after it have not been transferred to the
destination unit. You can press [OFF] on the cordless
handset or [STOP] on the base unit to exit
(p. 38, 39). To erase other stored items from the
destination unit directory, see page 37. You can send
all of the items again or send the items which have
not been transferred one by one (p. 38, 39).
• If the transfer is stopped and " Directory full " is
not displayed, it may indicate:
– the destination cordless handset is out of area, or
– the destination unit user may have pressed [
[ ] on the cordless handset, lifted the base unit
handset or pressed [DIGITAL SP-PHONE] .
• Although you tried to send your directory items to
another extension, your directory is empty.
• When you call another unit to monitor, the Room
Monitor mode of the destination unit is set to OFF
(p. 45).
_
] or