Flash Button; Set Flash Time - Panasonic KX-TG2770CS Operating Instructions Manual

✻✴✥✪✪✣✰✲✰o❍❅l❆ss✻❆l✥.❇m 5✧
Special Features

FLASH Button

Pressing [FLASH/CALL WAIT] also allows you to use special features of your host
PBX such as transferring an extension call or accessing optional telephone
services such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels the Temporary Tone Dialing mode or the
mute (p. 49).
Selecting the flash time (use either
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)". The factory preset is "700 ms".
• If the unit is connected via a PBX, PBX functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for the correct settings.
Base Unit
1
Press [FUNCTION/EDIT] .
2
Scroll to " Initial setting " by pressing
[ ] or [ ] , then press [ ] .
3
Scroll to " Set tel line " by pressing [ ] or
[ ] , then press [ ] .
4
Scroll to " Set flash time " by pressing [ ]
or [ ] , then press [ ] .
5
Select the flash time by pressing [ ] or [ ] .
6
Press [ ] ( Save ), then press [STOP] .
Handset
Press [CONF/FUNCTION] , and follow steps 2 to 5 above, using the
cordless handset. Press the soft key (
54
] Y ]
Base Unit Handset
), then press [OFF] .
SA VE
_
or
Base Unit Handset
Initial setting
Set tel line

Set flash time

Set flash time
:700ms
=Save
)