Registration For Additional; Handsets - Panasonic KX-TG2770CS Operating Instructions Manual

✻✴✥✪✪✣✰✲✷❍❆❋❂❍❂❏❊on.❇m ✥✧
Registration for Additional Handsets
KX-TG2770CS includes a base unit and one cordless handset. You can expand the
system by adding up to 7 additional cordless handsets, sold separately. A maximum
of 8 cordless handsets can be registered to the base unit.
Generally a maximum of 4 extensions excluding or including the base unit can
operate at a time. If 4 other extensions are in use, such as when conducting a call,
you may not be able to use your unit. " System is busy. Please try again
later. " will be displayed when you try to operate your unit. The maximum
operating number may decrease, depending on the state of usage, such as using
the Reception Booster mode (p. 28), or when the Answering System is taking a call.
KX-TG2770CS
The included cordless handset is pre-registered at the factory and assigned
the extension number 1. You do not need to register the handset which has
"[ 1 ]" on the display. If you purchase accessory cordless handsets, you must
register each to the base unit. Only one cordless handset can be registered at a
time. A cordless handset will be assigned the extension number at registration.
The model numbers of the accessory cordless handsets are KX-TGA270CS,
KX-TGA271CV, KX-TGA271CW, KX-TGA272CS and KX-TGA273CS.
Charge the battery fully. Make sure the base unit and the other cordless
handsets are not being used. Registration must be completed within 1 minute.
The handset display shows the instructions as
shown on the right.
1
Base unit: Press [MUTE] .
• The MUTE indicator flashes.
2
Cordless handset:
(1) Press the soft key (
(2) Wait until a long beep sounds and the
display shows the registered number.
• Registration is complete.
• You can stop registration by pressing [OFF] on the cordless handset and pressing
[MUTE] on the base unit.
• To re-register a cordless handset to a different base unit of the same model, see
pages 71 and 72.
24
] ]
Up to 7 accessory handsets can be added.
•The illustration is KX-TGA270CS.
)
.
OK
_
Base Unit & Handset
Press MUTE on
base unit, then
OK on handset to
register handset
e.g. Extension number 2
[2]
Handset [2]
Registered