Panasonic KX-TG2770CS Operating Instructions Manual page 61

✻✴✥✪✪✣✰✲✻✮M.❇m ✩✤
During playback
To adjust the
speaker volume
To slow down the
playback speed
(Slow Talk message
playback)
To repeat a message
To skip a message
To stop playback
For Call Display service users (p. 30)
During playback, the display shows the name and/or number of the caller whose
message is being played.
To call back the displayed number:
Base unit: Lift the handset off the cradle or press [DIGITAL SP-PHONE] while
the number is displayed.
Cordless handset: Press the soft key (
• The unit stops playback and dials the phone number.
• If you need to edit the phone number to call back, see page 32.
• After listening to new incoming messages, " √ " will be added to the call entries
in the base unit Caller List, but those of the handset Caller List will still remain
NEW (p. 31).
] ]
Listening to Messages
Base Unit Handset
To increase, press [ ] . To decrease, press [ ] .
• You can also adjust the receiver volume on the
cordless handset.
Base unit: Press the MAILBOX button ( [MAILBOX 1] ,
[MAILBOX 2] or [MAILBOX 3] ) of the message that is
being played.
Cordless handset: Press [3] .
• To return to normal speed, press the MAILBOX button
on the base unit or [3] on the cordless handset.
• Each time you press the button during playback, the
speed will change to slow/normal.
• The playback speed will return to normal after you
finish listening to messages.
Base unit: Press [ ] .
Cordless handset: Press [ ] or [1] .
• If you press within 5 seconds of playback, the previous
message will be played.
Base unit: Press [ ] .
Cordless handset: Press [ ] or [2] .
Base unit: Press [STOP] .
• To resume playback, press the MAILBOX button
( [MAILBOX 1] , [MAILBOX 2] or [MAILBOX 3] ) of the
message that is being played.
• If you do not press any button for 60 seconds or if you
press [STOP] again, the playback mode will be cancelled.
Cordless handset: Press [9] .
• If you do not press any button within 15 seconds, the
voice menu will start (p. 60).
) while the number is displayed.
DIAL
_
61