Installing The Battery In The Cordless Handset; Battery Charge - Panasonic KX-TG2770CS Operating Instructions Manual

2.4 ghz expandable corded/cordless answering system
Table of Contents

Advertisement

✻✴✥✪✪✣✰✲✷❍❆❋❂❍❂❏❊on.❇m ✤✤

Installing the Battery in the Cordless Handset

Insert the battery (
), and press it down until it snaps into the compartment (
1
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a
new one (p. 12). Close the cover and charge the
cordless handset for about 15 hours.

Battery Charge

Place the cordless handset on the
charger and charge for about 15 hours
before initial use.
• The unit beeps once, the CHARGE indicator
lights and " Charging " is displayed.
• Repeat charging will require approximately
the same amount of charging time (15
hours) if the battery is depleted completely.
Battery strength
You can check the battery strength on the cordless handset display.
The battery strength is as shown in the chart below.
Display prompt
(flashing)
]
2
1
Battery strength
Fully charged
Medium
Needs to be recharged.
Discharged
]
_
Installation
Charge
Contacts
CHARGE Indicator
Low
).
2
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents