Table of Contents
Advertisement
✿✤✦✪✣5Z✮_✥.❇m ✫
Settings
Connections
Fasten the AC adaptor
cord.
Hook
• USE ONLY WITH Panasonic AC ADAPTOR PQLV19.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Call Display services,
you cannot access those services.
• The unit will not work during a power failure. If you want to connect a standard
telephone on the same line, use a T-adaptor.
Installing the Battery in the Handset
1
Insert the battery (
Close the cover.
• After installing the battery, set the display and voice guidance language. (See
page 9.)
To replace the battery:
Press the notch on the cover firmly and slide it as indicated
by the arrow. Replace the old battery with a new one (p. 10).
Close the cover and charge the battery for about 6 hours.
8
]
]
), and press it down until it snaps into the compartment (
1
_
Single-Line Telephone Jack (CA11A)
Telephone Line Cord
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
2
2
).
Advertisement
Table of Contents
