Installing The Midplane - QUANTA Rackgo X Series F03A Technical Manual

I H
NSTALLING ARDWARE

Installing the Midplane

Make sure the enclosure is on a clean work surface before starting this procedure.
1. Align the midplane board with the standoffs on the rear assembly.
2. Slide the midplane from right to left to lock the midplane on the rear assembly.
3. Secure the midplane and rear assembly with the provided screws.
Figure 2-19. Installing the midplane
Figure 2-20. Installing the midplane
I M
NSTALLING THE IDPLANE
2-14