QUANTA Rackgo X Series F03A Technical Manual page 51

I H I BBU
NSTALLING ARDWARE NSTALLING AN I
5. Secure with the provided screws
Figure 2-29. Installing the iBBU Assembly
6. Connect the iBBU cable to the battery
Figure 2-30. Connecting the iBBU Cable
7. Connect the iBBU cable to the expansion card.
Note:
The iBBU can be connected to either a mezzanine card or an expansion card.
8. Lift the sled tray and align it with the chassis bay.
9. Slide the sled tray in the chassis. See Securing a Sled Tray on page 2-2.
2-22