Fl Inverter Board - Toshiba 650CT Maintenance Manual

4.15 FL Inverter Board

Removing the FL Inverter Board
To remove the FL inverter board, follow the steps below and refer to Figure 4-36.
1. Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2. Remove the battery pack, optional memory module, optional PC card and display
mask as described in sections 4.2, 4.3, 4.4 and 4.14.
3. Remove two M2x6 screws securing the FL inverter board.
NOTE: Support the display with your hand, book or support block when you
remove the screws.
4. Carefully rotate the FL inverter board towards the display to access the FL
inverter cable and FL cable.
5. Disconnect the FL inverter cable from CN2 and the FL cable from CN1 and lift
out the FL inverter board.
4-36
Figure 4-36 Removing the FL inverter board
650CT