Toshiba 650CT Maintenance Manual page 109

3.25.3 Moving Within the SETUP Menu and Changing Values
Press ← ← ← ← ← and → → → → → to move between the two columns. Press ↑ ↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ↓ to move be-
1.
tween items in a column.
2. Press either the space bar or BkSp to change the value.
NOTE: On either page, you can go directly to a specific group by
pressing the first letter (highlighted) of the group's name. For example,
press B to go to the Battery group.
To change pages, press the PgUp (page up) or PgDn (page down) key.
3.25.4 Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message
is displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is dis-
played:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
(a) To make other changes, press N, then repeat the steps above.
(b) To accept the changes, press Y. The system will reboot automatically.
NOTE: You can press Esc to quit at any time without saving changes.
Before exiting the SETUP window, the system will ask to confirm that
you don't want to save your changes.
3.25.5 The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press Home.
2. To accept the default settings, press End and then press Y.
650CT
3-55