Installing the Docking Adapter Covers
To install the Docking Adapter covers, follow the steps below and refer to Figures 4-47 back
through 4-45.
1.
Seat the interface connector cover and secure it with two M2.5x8 silver screws
and two M2.5x6 screws.
2.
Seat the upper cover, secure the latches and the rails, then secure them with two
M2.5x8 silver screws.
3.
Turn the Docking Adapter upside down and secure the five M2.5x6 silver
screws.
4-48
650CT