Table of Contents
Advertisement
4.5
Hard Disk Drive (HDD)
Removing the HDD
To remove the HDD, follow the steps below and refer to Figures 4-9 to 4-12.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, and optional PC card as
described in Sections 4.2 through 4.4.
3.
Turn the computer upside down and remove two M2x6 silver screws securing the
HDD.
4.
Turn the computer right side up and slide your fingernail or a thin object under the
cover to remove the HDD cover.
CAUTION: The cover is connected by two insulator strands. Be careful not
to damage these strands when you remove the cover.
4-12
Figure 4-9 Removing the HDD screws
650CT
Advertisement
Table of Contents
Troubleshooting
