Toshiba 650CT Maintenance Manual page 118

(i) Boot Priority
Use this option to select the disk drive priority for boot up.
FDD → HDD
HDD → FDD
You can reverse the order by holding down the F10 key while the
computer is booting. This procedure alternates the setup setting.
(j) Pointing Devices
This option enables or disables the AccuPoint.
Auto selected
Simultaneous
(k) PC Card Controller Mode
Use this option to set the PC card controller mode.
PCIC Compatible
CardBus/16bit
7. Display
Use this option to set the VGA segment address:
(a) VGA Segment Address
E000h-EFFFh
E400h-EFFFh (Default)
C000h-CBFFh
E000h-EBFFh
3-64
The computer looks for bootable files first on
the FDD and then on the HDD. (Default)
The computer looks for bootable files first on
the HDD and then on the FDD.
If the PS/2 mouse is connected to the computer
when you turn on the power, the PS/2 mouse is
enabled and the AccuPoint is disabled. Other-
wise, the AccuPoint is enabled. (Default)
Enables both the AccuPoint and PS/2 mouse.
For the PCMCIA R2.01 and ZV port cards.
(Default)
For the PC card 16 multi-function card,
CardBus card and ZV port card.
650CT