Page 1 Double-click the desktop icon or visit the Web site: http://virtualtech.answerteam.com InTouch Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see Chapter 9 on page TOSHIBA ™ e-support tool Center ® 6000 of this guide. C6602-1001M1...
Page 2 DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED.
Page 3 : Only peripherals complying with the FCC Class B limits may be attached to this computer. Operation with non-compliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s serial port, parallel port, monitor port,...
Page 4: Type Of Service
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation or an authorized representative of Toshiba Corporation. Disconnection If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change.
Page 6 Instructions for IC CS-03 certified equipment NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The Toshiba Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision B), as defined and...
Page 8: Regulatory Information
Wireless LAN device prior to turning on the equipment. Regulatory Information The Toshiba Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9: Interference Statement
The Toshiba Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the Toshiba Wireless LAN Mini PCI Card in such a manner that human contact during normal operation is minimized.
Page 10: Safety Instructions
Approved Countries for use This equipment is approved to the radio standard by the countries in Fig.1. Australia Canada Germany Japan New Zealand Switzerland Greece Poland Caution: Do not use this equipment except in the countries in Fig.1. CD-ROM, DVD-ROM, DVD-ROM/CD-RW safety instructions The CD-ROM,DVD-ROM, DVD-ROM/CD-RW drives employ a laser system.
Page 11 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 12 Satellite, AccuPoint II, Fn-esse, Noteworthy, and SelectBay are registered trademarks, SelectServ, Ask IRIS Online, and VirtualTech are trademarks, and InTouch is a service mark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. IBM and Wake on LAN are registered trademarks and PS/2 is a trademark of IBM Corporation.
Page 13: Energy Star Compliance
Energy Star is a registered trademark of the U.S. Environmental Protection Agency. ™ Bluetooth is a trademark owned by its proprietor and used by Toshiba under license. All other brand and product names are trademarks or registered trademarks of their respective companies.
Page 14 - Blank Page -...
Page 15: Table Of Contents
Contents Introduction... 23 This guide... 23 Safety icons... 24 Other icons used... 25 Other documentation... 25 Service options... 26 Chapter 1: Finding Your Way Around... 27 Making sure you have everything... 27 Front with the display panel closed... 28 Back with rear panel closed... 29 Back with rear panel open...
Page 16 Selecting a place to work... 39 Creating a computer-friendly environment... 39 Keeping yourself comfortable... 40 Other precautions ... 43 Setting up your computer... 44 Connecting to a power source... 45 Turning on the computer... 47 Opening the display panel... 47 Turning on the power ...
Page 17 Using Slim SelectBay® modules... 69 Removing a module from the Slim SelectBay® ... 70 Inserting a module into the Slim SelectBay®... 71 Inserting and removing hard drives ... 71 Inserting and removing PC Cards... 73 Inserting a PC Card... 73 Removing a PC Card...
Page 18 Powering down the computer... 105 Using Turn Off Computer... 105 Using Hibernation... 108 Using Standby... 110 Toshiba’s online resources... 113 Chapter 5: Power Management... 115 Toshiba’s energy-saver design... 115 Running the computer on battery power... 116 Charging the batteries... 116 Monitoring battery power...
Page 19 Finding your way around the desktop... 127 Exchanging data with another computer... 130 Transferring files... 131 Getting help transferring files... 131 Setting up for communications... 131 Connecting the modem to a telephone line... 133 Connecting your computer to a network ... 133 An overview of using the Internet...
Page 20 Adjusting the quality of the external display... 177 Video limitations... 178 Using the Wi-Fi Accessing the Wi-Fi Using an expansion device... 179 Chapter 8: Toshiba Utilities... 181 Fn-esse... 182 Starting Fn-esse... 182 Using the keyboard or pointing device to assign keys 184 Viewing existing key assignments... 185 ™...
Page 21 Power Management... 189 Slim SelectBay™ and Docking... 192 Mobile Extension Service... 192 Slim SelectBay™ Service ... 193 Toshiba Hardware Setup ... 193 Toshiba Power Saver utility... 195 Enabling Hibernation... 195 Setting user passwords... 196 Using an instant password ... 197 Setting a user password...
Page 22 Using VirtualTech... 232 If you need further assistance... 232 Before you call... 233 Contacting Toshiba... 233 Other Toshiba Internet Web sites ... 234 Toshiba’s worldwide offices... 235 Appendix A: Hot Keys... 239 Appendix B: Power Cable Connectors... 247 Appendix C: Video Modes... 249 Glossary...
Page 23: Introduction
Introduction Welcome to the world of powerful, portable multimedia computing. With your Toshiba notebook computer, your work can accompany you wherever you go. ® Satellite Pro 6000 Series computers provide considerable computing power, enabling you to perform the most demanding computing tasks from any location.
Page 24: Safety Icons
Safety icons If you are new to computers or have not used a notebook computer before, read through this chapter to familiarize yourself with the components of the computer. After that, seek out whatever interests you most. Safety icons This guide contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
Page 25: Other Icons Used
Recovery and Configuration Builder CD. Toshiba accessories information, which lists accessories available from Toshiba and explains how to order them. The Microsoft which explains the features of the operating system.
Page 26: Service Options
Service options Service options Toshiba offers a full line of service options built around its ™ SelectServ warranty programs. For more information, visit Toshiba’s Web site at Toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong”...
Page 27: Chapter 1: Finding Your Way Around
Before you do anything else, consult the Quick Start card shipped with your computer to make sure you received everything. If any items are missing or damaged, notify your authorized Toshiba representative or your network administrator immediately. For additional help, see Wrong” on page “If Something Goes...
Page 28: Front With The Display Panel Closed
Finding Your Way Around Making sure you have everything Front with the display panel closed Infrared port Sliding the display latch opens the computer’s display panel. For more information, see page 34 The system indicator panel consists of several lights that provide information about various system functions.
Page 29: Back With Rear Panel Closed
Back with rear panel closed Cooling vent DC IN socket DC IN socket—Lets you plug in the AC adapter. Cooling vent—Provides ventilation to keep the computer’s processor from overheating. The vent lets the processor continue performing at its maximum speed. CAUTION: To prevent possible overheating of the computer’s processor, make sure you don’t block the cooling vent.
Page 30: Back With Rear Panel Open
Finding Your Way Around Making sure you have everything ™ PS/2 port—Lets you connect an optional PS/2-compatible mouse or keyboard. You can use an optional Y-cable to connect both a mouse and a keyboard to the port. Back with rear panel open RGB port Parallel port RGB port—Lets you connect an external monitor or projector.
Page 31: Right Side
Right side HDD bay cover Speaker—Lets you hear stereo sound from a CD or DVD in addition to system alarms and audible warnings associated with your software. Left side Speaker Video-out port * for systems with optional Wi-Fi Speaker—Lets you hear stereo sound from a CD or DVD in addition to system alarms and audible warnings associated with your software.
Page 32 Finding Your Way Around Making sure you have everything The PC Card lock allows you to secure your PC Cards in the slots. Slide the button to the right to lock the PC Cards. This lock mechanism can be secured in place using a computer lock. See “Using a computer lock”...
Page 33: Underside
Underside Slim SelectBay release Slim SelectBay slot PC card lock Battery module—Lets you to use your computer when a standard electrical outlet is not available. For further information about using the battery, see power” on page Battery lock—Locks the battery in place to prevent accidental removal.
Page 34: Keyboard And Display Features
Finding Your Way Around Keyboard and display features The expansion memory cover protects the slot in which you can install up to two memory modules. For more information on expanding your computer’s memory, see page Keyboard and display features Front with the display panel open To view the front of the computer with the display panel open: Locate the display latch on the front of the computer.
Page 35 Adjust the display panel to a comfortable viewing angle. CAUTION: To avoid damaging the display panel, be careful when opening and closing it. Never force the panel beyond the point where it moves easily, and never use it to lift the computer.
Page 36: Indicator Panel Lights
Finding Your Way Around Keyboard and display features turn system functions on and off. For more information on how to use the internal keyboard, see For information on using an external keyboard, see external (optional) devices” on page Keyboard indicator panel—These lights provide information about various keyboard functions.
Page 37: Keyboard Indicator Panel Lights
Main battery light—Indicates the status of the main battery. Flashes amber when you are running on battery power and the battery charge is running low. Does not glow when you are running on battery power and the battery charge is not running low. Glows amber when you are connected to AC power and the battery is charging.
Page 38 Finding Your Way Around Keyboard and display features Numlock light—Glows when the numeric overlay is on. When this light is on, pressing an overlay key produces the white number printed on the right front of the key instead of the letter printed on the top of the key.
Page 39: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.
Page 40: Keeping Yourself Comfortable
AC power source and let it dry out completely before turning it on again. If the computer does not operate properly after you turn it back on, contact a Toshiba service representative or your network administrator. Equipment that generates a strong electromagnetic field, such as large stereo speakers (other than speakers that are connected to the computer) or speakerphones.
Page 41: Placement Of The Computer
This section provides hints on avoiding strain and stress injuries. For more information, consult books on ergonomics, repetitive- strain injury, and repetitive-stress syndrome. Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer.
Page 42 Getting Started Selecting a place to work Below eye level Footrest Correct posture and positioning of the computer Position your chair so that the keyboard is at or slightly lower than the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor.
Page 43: Other Precautions
Position the display panel or external monitor so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted windows or shades to reduce glare. Avoid placing your computer in front of a bright light that shines directly into your eyes. If possible, use soft, indirect lighting in your computer work area.
Page 44: Setting Up Your Computer
Getting Started Setting up your computer certain precautions to further reduce the risk of personal injury or damage to the computer. CAUTION: Do not apply heavy pressure to the computer or subject it to sharp impacts. Excessive pressure or impact can damage computer components or cause your computer to malfunction.
Page 45: Connecting To A Power Source
AC power source and to charge the computer’s batteries. Power cable and AC adapter CAUTION: Use of the wrong AC adapter could damage your computer. Toshiba assumes no liability for any damage in such cases. Never pull directly on the power cable to unplug it. Hold the power plug when removing the cable from the outlet.
Page 46 Getting Started Setting up your computer Connecting the power cable to the AC adapter Connect the DC OUT end of the AC adapter cable to the DC IN jack at the back of the computer. Connecting the AC adapter cable to the computer Insert the plug end of the power cable into a live wall outlet.
Page 47: Turning On The Computer
remove the battery pack. See on page 201 DANGER: Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable. If the power cable becomes damaged or the plug overheats, discontinue use.
Page 48: Turning On The Power
Getting Started Turning on the computer Lift the display panel. CAUTION: To avoid damaging the display panel, do not force it beyond the point where it moves easily, and never lift the computer by the display panel. Turning on the power To turn on the computer: Make sure any external devices (such as the AC adapter, if you plan to use AC power rather than battery power) are...
Page 49: Using The Accupoint Ii Pointing Device
The preinstalled operating system will load automatically. CAUTION: When you turn on the computer for the first time, don’t turn off the power again until the operating system has loaded completely. Using the AccuPoint II pointing device The button in the middle of the keyboard is the AccuPoint II pointing device.
Page 50: Setting Up Your Software
Getting Started Setting up your software The primary AccuPoint II button corresponds to the primary (typically left) mouse button. When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary AccuPoint II button.
Page 51: Setting Up Other Devices
You may be offered the opportunity to register your computer with Toshiba. If not, make sure you register later. NOTE: To register online, your computer’s modem must be connected to a voice-grade telephone line, or the Internet via a Local Area Network.
Page 52: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer It’s generally a good idea to turn off your computer when you are not using it. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.
Page 53 Getting Started Turning off the computer If you have the audible warning set, the computer will beep to notify you that it is still on. If you have an action feature set, the computer will perform either: Nothing, Standby, Hibernate, or Turn Off (see “Enabling Hibernation”...
Page 54 Getting Started Turning off the computer - Blank Page -...
Page 55: Chapter 3: Connecting Other External Devices
An external monitor or projector via the RGB port. Before connecting a television, video projector, monitor or other display device, configure your computer for the type of device you’re connecting. To do this, refer to the documentation for your operating system and devices. ® 6000 Series computer.
Page 56: Connecting The Display Device
For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 57: Directing The Display Output When You Turn On The Computer
Set the display mode by pressing Display Properties settings. For more information, see “Directing the display output when you turn on the computer” on page Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen.
Page 58: Adjusting The Quality Of The External Display
Connecting Other External Devices Using external display devices TV (or other external video device) only Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box. For more information on switching the display output, see “Connecting the display device” on page Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings.
Page 59: Using An External Keyboard
Don’t worry: you can use a key combination on the external keyboard to emulate the Connecting Other External Devices Using an external keyboard 6000 Series computer’s built-in keyboard. If you use ) to change the display key contained on the key. You can set up this...
Page 60: Using A Mouse
Connecting Other External Devices Using a mouse key combination through the Windows Control Panel Toshiba HWSetup icon. For more information about Hardware Setup, see “Toshiba Hardware Setup” on page NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon.
Page 61: Connecting A Local Printer
Double-click the Toshiba HWSetup icon. Select the Pointing Devices tab, then click Simultaneous. Connecting a local printer CAUTION: Never connect the printer cable while the computer’s power is on. Doing so may damage the printer, the computer, or both. Before you can connect a printer, you need to know whether it uses a serial or a parallel interface.
Page 62: Connecting An External Diskette Drive
Connecting Other External Devices Connecting an external diskette drive To the computer Identifying the ends of a parallel printer cable Plug the printer’s power cable into a live electrical outlet. See your printer documentation for additional configuration steps. For more information on getting your printer to print, see “Printing your work”...
Page 63: Connecting External Speakers Or Headphones
Connecting external speakers or headphones Connecting an optional external USB diskette drive Connecting external speakers or headphones To attach an external stereo output device: Locate the headphone jack on the front of the computer. Using any necessary adapters, plug the cable from the external audio device into the headphone jack.
Page 64: Using An Expansion Device
When you return, you can quickly connect your computer and have immediate access to all the devices. Toshiba offers the following expansion devices for the Satellite ® 6000 Series:...
Page 65: Memory Module Sizes
BIOS memory check. A message may display. If this occurs, remove the invalid memory and return your machine back to its original configuration, or contact Toshiba’s support center at (800) 457-7777 for additional help. Since your computer was built to order, it should have enough memory to run your current applications.
Page 66: Installing A Memory Module
Connecting Other External Devices Adding memory Installing a memory module Additional memory modules can be installed in the memory expansion slots on the base of the computer. You will need a standard Phillips no.1 screwdriver for this procedure. CAUTION: To avoid damaging the computer’s screws, use a standard Phillips no.
Page 67 Connecting Other External Devices Locate and remove the screws that hold the cover plate in place, and lift the cover off of the memory module bay. Removing the memory module cover CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the...
Page 68: Removing A Memory Module
Connecting Other External Devices Adding memory Inserting the memory module into the slot Replace the cover plate and the screws. Turn the computer over and restart it. When you turn on the computer, it automatically recognizes the additional memory. Removing a memory module If you need to remove a memory module: Complete steps 1–6 in “Installing a memory module”...
Page 69: Using Slim Selectbay® Modules
Pulling the clips away from the memory module Carefully remove the module from the slot. Replace the cover plate and screws. Turn the computer over and restart it. Using Slim SelectBay The Slim SelectBay gives you additional flexibility. By inserting and removing Slim SelectBay modules, you can configure your computer for the task at hand without having to carry unnecessary components with you when you travel.
Page 70: Removing A Module From The Slim Selectbay
Connecting Other External Devices Using Slim SelectBay® modules CD-RW/DVD combo drive with both CD-RW and DVD drive. Secondary battery Secondary hard disk drive (HDD) HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit toshibaaccessories.com Removing a module from the Slim SelectBay...
Page 71: Inserting A Module Into The Slim Selectbay
105. Unplug the computer. Close the display panel and remove any cables you may have connected. Connecting Other External Devices Inserting and removing hard drives ® 6000 can use 20GB, 30GB, and 40GB hard “Powering down the computer” on ®...
Page 72 Connecting Other External Devices Inserting and removing hard drives Turn the computer upside down. Remove the screw on the hard drive bay cover. Removing the hard drive cover screw Lift the hard drive bay cover to expose the hard drive. Grasp the plastic tab on the exposed edge of the hard drive and pull it to remove the hard drive from the computer.
Page 73: Inserting And Removing Pc Cards
Inserting the new hard disk drive Replace the hard drive bay cover and tighten the screw removed in step 5 above. Inserting and removing PC Cards Your Satellite Pro Card slots and supports three types of PC Cards: Type I cards—You can install up to two of these cards, one in each slot.
Page 74 Connecting Other External Devices Inserting and removing PC Cards If the PC Card slots are locked, unlock them by turning the computer over, locating the PC Card lock, removing the retaining screw, sliding the lock into the unlocked position, and replacing the screw. Insert the PC Card.
Page 75: Removing A Pc Card
Locking the PC Card Removing a PC Card If the PC Card slots are locked, unlock them by turning the computer over, locating the PC Card lock and sliding it into the unlocked position Locate the PC Card ejection button that corresponds to the slot in which your PC Card is installed.
Page 76: Inserting And Removing Bluetooth™ Modules
Grasp the edges of the PC Card and slide it out of the slot. Inserting and removing Bluetooth Your system may come with an optional Bluetooth module. If you wish to insert or remove a Bluetooth module contact a Toshiba Wireless Authorized Service Provider. Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them.
Page 77: Inserting An Sd Media™ Card
Inserting an SD Media To insert an SD Media card: Turn the card so that the contacts (metal areas) are face down. Push the card into the slot until it locks in place. CAUTION: Do not touch the SD Media area).
Page 78: Connecting Your Modem To A Telephone Line
Connecting Other External Devices Connecting your modem to a telephone line The card pops out slightly. Lift the left side of the computer, grasp the card, and pull it straight out. Connecting your modem to a telephone line Your computer comes with a built-in modem that can be connected to a standard voice-grade telephone line.
Page 79 Connecting Other External Devices Connecting your modem to a telephone line Connecting the telephone cable to the modem port Connect the other end to the RJ11 wall jack. Connecting to a wall jack CAUTION: The modem is designed for use with a standard analog telephone line.
Page 80 Connecting Other External Devices Connecting your modem to a telephone line Now you’re ready to send a fax or use the modem to connect to an online service or the Internet. HINT: If you’re using a telephone line at home, disable Call Waiting before connecting through the modem.
Page 81: Chapter 4: Learning The Basics
Chapter 4 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 82: Using The Keyboard
Learning the Basics Using the keyboard Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It’s easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 83: Character Keys
Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page. The lowercase letter l (el) and the number 1 are not interchangeable.
Page 84: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Press right side of the enhanced keyboard. Press the numeric pad of the enhanced keyboard. Ctrl, Fn, and Alt keys Ctrl Ctrl, Fn, and Alt keys , and Ctrl program you are using. For more information, see your program documentation.
Page 85: Overlay Keys
Your computer’s keyboard has two keys that have special functions in Windows: Start key—Opens the Start menu Application key—Has the same function as the secondary mouse (or AccuPoint II) button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Page 86 Learning the Basics Using the keyboard You can still use the overlay keys to type alphabetic characters while the numeric overlay is on. To do so: For lowercase letters, hold down For uppercase letters, hold down both type the letters. To use the cursor control keys when the numeric overlay is on: Press and hold down overlay keys.
Page 87: Starting A Program
To disable the cursor control overlay, hold down the press again. The cursor control mode light on the keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options.
Page 88: Starting A Program From Windows® Explorer
Learning the Basics Starting a program Click the program, in this example, Wordpad. Wordpad opens. To close the program, click the Close button in the upper- right corner of the program’s window. Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows of your computer’s contents as a hierarchy or “tree.”...
Page 89: Starting A Program From The Run Dialog Box
Starting a program from the Run dialog box This example uses the Run command to start Wordpad: Click Start, then click Run. The Run dialog box appears. Sample Run dialog box In the Run dialog box: If you know the program’s location, type the command line.
Page 90: Saving Your Work
Learning the Basics Saving your work Saving your work Before you turn off the computer, save your work on the hard disk drive or a diskette. This is one of the most important rules of computing. TECHNICAL NOTE: Save your data even when you are using the Standby command, in case the main battery discharges before you return to work.
Page 91: File Names
A sample Save As dialog box Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 92: Printing Your Work
Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft Any file name with an extension of “.doc” is assumed to be a ®...
Page 93: Using A Compact Disc Drive
Slim SelectBay, follow the instructions in SelectBay® modules” on page HINT: Your DVD-ROM drive is designed to play Region 1 (North America) DVD-ROMs. Learning the Basics Using a compact disc drive ® 6000 Series computer may have a CD-ROM, “Using Slim...
Page 94: Inserting Compact Discs
Learning the Basics Using a compact disc drive Drive in-use indicator light Eject button Manual eject hole A DVD/CD-ROM drive Drive in-use indicator light—Indicates when the CD-ROM or DVD-ROM drive is in use. Eject button—Press to release the disc tray. CAUTION: Do not press the eject button or turn off the computer while the Drive in-use indicator light is glowing.
Page 95 The disc tray slides partially out of the drive (about 1 inch). HINT: The drive won’t open if the computer’s power is off. Grasp the tray and pull it fully open. The drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in and DVDs”...
Page 96: Removing Compact Discs
Make sure the disc is completely on the spindle and is lying flat on the tray. CAUTION: If you insert the disc incorrectly, it may jam the drive. If this happens, contact your Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 97: Caring For Cds And Dvds
Gently push the tray in to close it. To remove a compact disc with the computer turned off: Insert a slender object, such as a straightened paper clip, into the manual eject hole. Gently pull the tray out until it is fully open, remove the disc, and place it in its protective cover.
Page 98: Using Pc Cards
Learning the Basics Using PC Cards Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use.
Page 99: Using Sd Media Cards
Using SD Media cards If you do not already have a SD Media card inserted in the computer, you may do so following the procedures outlined in “Inserting an SD Media™ card” on page Important: Do not use the Copy Disk function for SD Media cards.
Page 100: Using A Computer Lock
Learning the Basics Using a computer lock Using a computer lock For your own peace of mind, you may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional PORT-Noteworthy Computer Lock Cable.
Page 101: Caring For Your Computer
Never use harsh or caustic chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. Learning the Basics Caring for your computer 116.
Page 102: Moving The Computer
Your computer comes with a Recovery and Configuration Builder CD that enables you to reinstall software that was preinstalled. This CD can be used to install or reinstall particular Toshiba applications, utilities, and drivers. Back up all the files you create in case something happens to your computer.
Page 103: Restoring Your Work
Complete information on the backup program is in the online Help and your Windows HINT: Backing up all the files on your hard disk takes a considerable amount of time and many diskettes. You may prefer to use a high-capacity backup system, such as an external tape drive.
Page 104: Different Ways To Turn The Computer On And Off
Learning the Basics Different ways to turn the computer on and off Before you can use the modem, you must connect it to a standard voice-grade telephone line. See on page 45 Different ways to turn the computer on and off Instead of turning on your computer by pressing the power button, you can: Set the computer to turn on automatically at a time you...
Page 105: Powering Down The Computer
Powering down the computer When you power down the computer, you have three options to choose from: Turn Off Computer, Standby, and Hibernation. TECHNICAL NOTES: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off.
Page 106: Shutting Down More Quickly
To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility. Open the Start menu, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba Power Saver icon.
Page 107 When I press the power button Set this option to Power Off to have the computer shut down when you press the power button. When I close the lid Set this option to Power Off to have the computer shut down when you close the display panel.
Page 108: Using Hibernation
Click OK again, then close the Control Panel. NOTE: For more information about the Power Saver utility, “Toshiba Power Saver utility” on page Starting again after Shut down To start the computer up again, press the power button until the on/ off light changes to green.
Page 109 Configuring your computer for Hibernation: Open the Start menu, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon.
Page 110: Using Standby
The computer is now set to automatically go into Hibernation when your option settings occur. NOTE: For more information about the Power Saver utility, “Toshiba Power Saver utility” on page Once the computer is configured, put the computer into Hibernation mode by either pressing the power button or closing the display panel, depending on the hibernation options taken.
Page 111: Going Into Standby Mode More Quickly
Standby mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Open the Start menu, then click Control Panel. Learning the Basics Powering down the computer ®...
Page 112 Learning the Basics Powering down the computer In the Control Panel window, double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon. In the Running on batteries area, click the Details button, then select the System Power Mode tab.
Page 113: Toshiba's Online Resources
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 114 Learning the Basics Toshiba’s online resources - Blank Page -...
Page 115: Chapter 5: Power Management
The computer enters a low-power, standby mode when it is not being used, thereby conserving energy. Many of these energy-saving features have been set by Toshiba or your network administrator. We recommend you leave these features active, so that your computer will operate at its maximum energy efficiency.
Page 116: Running The Computer On Battery Power
Power Management Running the computer on battery power Running the computer on battery power The computer contains a removable lithium ion (Li-ion) battery pack that provides power when you are away from an AC outlet. This is the main battery. You can recharge it many times. In addition to the main battery, you may also have a second battery installed in the Slim SelectBay.
Page 117: Monitoring Battery Power
The battery is almost completely discharged. Leave the power connected and the battery should begin charging after a few minutes. The main battery charges the RTC battery. During normal use, the main battery keeps the RTC battery adequately charged. Occasionally, the RTC battery may lose its charge completely, especially if you’ve had the computer turned off for a long time.
Page 118 To show remaining power: Click Start, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba Power Saver icon.
Page 119: What To Do When The Battery Alarm Sounds
To change the default alarm settings: Click Start, then Control Panel. Power Management ® operating system has additional power 195. ® 6000 Series computer can be configured to ® operating system offers two alarms before your “Toshiba Power Saver...
Page 120: Changing Batteries
Changing batteries Double-click the Toshiba Power Saver icon. NOTE: The Control Panel window must be set to Classic View to access the Toshiba Power Saver icon. Select the appropriate Running on Batteries option. Click the Details... button. Select the Alarms tab and adjust the settings to suit your needs.
Page 121 Turn the computer over. If the battery lock is in the locked position (towards the center of the computer), slide it towards the edge of the computer to unlock it. Slide the battery release latch to release the battery. Battery release latch Pull the discharged battery module out of the computer.
Page 122 Power Management Changing batteries Removing the discharged battery WARNING: If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in page 124. Wipe the terminals of the charged battery with a clean cloth to ensure a good connection.
Page 123: Taking Care Of Your Battery
Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life. Safety precautions Never try to disassemble a battery pack. Do not overcharge or reverse charge a battery. Overcharging will shorten its life and reverse charging could destroy it, causing the release of toxic fumes.
Page 124: Disposing Of Used Batteries
If not, check with your local government for information on where to recycle or dispose of old batteries. Only use replacement batteries recommended by Toshiba. CAUTION: The computer uses a lithium ion battery, which can explode if not handled or disposed of properly. Putting spent batteries in the trash is not only irresponsible, it may also be illegal.
Page 125: Power Usage Modes In Windows Xp Professional
In Windows power usage modes or select your own combination of power management options. To do this: Click Start, then Control Panel, and click on the Toshiba Power Saver icon. NOTE: Control Panel must be set to Classic View for the Toshiba Power Saver icon is visible.
Page 126: Additional Options For Power
The pop-up window disappears. You’re now in the selected mode. For more information on setting the battery power usage mode, “Toshiba Power Saver utility” on page Additional options for power Depending on the amount of time you spend away from external power sources, the capacity of one battery pack may be sufficient for your needs.
Page 127: Chapter 6: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore some of the special features of your Satellite Pro Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows XP Professional operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 128 Exploring Your Options Exploring the desktop Icons Start button Sample Windows Icons An icon represents a file or program that can be quickly activated by double-clicking the icon. The icons initially displayed on your ® Windows XP Professional operating system desktop include: My Documents —...
Page 129: Start Button
Suspend system activity and shut down the computer Exploring Your Options Exploring the desktop ® Help. ® browser that provides access — A Toshiba utility to help answer “Using VirtualTech” on ® XP Professional online Help for ® ® Windows XP Professional operating ®...
Page 130: Exchanging Data With Another Computer
Exploring Your Options Exchanging data with another computer Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 131: Transferring Files
A modem (one comes with your Satellite Pro computer) A telephone line A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet Exploring Your Options direct cable connection ® 6000 Series...
Page 132: Determining The Com Port
Exploring Your Options Exchanging data with another computer Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 133: Connecting The Modem To A Telephone Line
Exchanging data with another computer Make a note of the COM port number. To verify that the modem is set up properly, select the modem you wish to check and then click Properties to bring up the dialog box with information specific to that modem. Click the Diagnostics tab, and then click Query Modem.
Page 134 Card or an optional Bluetooth information about wireless networking, refer to your wireless network device documentation or contact your authorized Toshiba service provider. Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations.
Page 135: Setting Up A Wireless Connection
Exchanging data with another computer To disable the LAN port: Click Start, then click Control Panel. Double-click the System icon, click the Hardware tab, and then click the Device Manager button. NOTE: The Control Panel window must be set to Classic View to access the System icon.
Page 136 ™ Your Wi-Fi your computer system. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Provider. Using SPANworks The SPANworks 2000 application offers enhanced meeting productivity between networked computers.
Page 137: An Overview Of Using The Internet
things as transfer files between two computers, broadcast a slide presentation simultaneously to several machines, set up electronic business cards, and send text messages to a few people or to everyone in your proximity. NOTE: Before using SPANworks, you must establish a network link between computers.
Page 138: The World Wide Web
Exploring Your Options An overview of using the Internet The World Wide Web The World Wide Web (or “Web”) is a subset of the Internet — a collection of interlinked documents (located on computers connected to the Internet) that work together using a specific Internet protocol called Hypertext Transfer Protocol (HTTP).
Page 139: Surfing The Internet
Once you have established an ISP account, you can connect to the Internet. Connect your computer’s modem to a telephone line. For more information on connecting a modem, see “Connecting your modem to a telephone line” on page Start your Web browser. Have your modem dial the ISP’s telephone number, and establish a connection with the ISP’s computer.
Page 140: Uploading And Downloading Files From The Internet
Exploring Your Options Exploring audio features If you have an account with an ISP, you can probably set up an email address at the same time you sign up for the service. Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real-time, one-on-one or in groups, by typing messages which are instantly viewed by others on their computer screens.
Page 141: Playing An Audio Cd
Playing an audio CD Insert an audio CD and close the disc tray. The CD begins to play. If the computer is turned on, Windows Media the CD begins to play. You can use the Windows Media program to control the CD. To access the Windows Media the Start menu or activate it from the taskbar.
Page 142: Creating A Cd
Exploring Your Options Exploring audio features Creating a CD Your computer may come with a DVD-ROM/CD-RW multifunction drive that allows you to: Play pre-recorded DVDs Play pre-recorded CDs Read and write files (including music) to a CD-Recordable (CD-R) or CD-Rewritable (CD-RW) disc. The Easy CD Creator program controls the drive’s CD-RW features.
Page 143: Adjusting Recording Quality
Positioning Sample Sound Recorder screen Click the Record button. Speak normally into the microphone. When you’ve finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform. NOTE: You can only record 60 seconds at a time. To hear what you just recorded, click the Play button.
Page 144: Using External Speakers Or Headphones
Exploring Your Options Exploring audiovisual features In the Sound Recorder window, click Edit, then click Audio Properties. In the Audio Properties dialog box, adjust the Recording Volume, Preferred device, and Preferred quality. Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Page 145: Playing Dvds
center that helps you get the most out of the exciting world of DVD technology. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, always play DVDs while your computer is connected to AC power. If your computer has a DVD-ROM, or DVD-ROM/CD-RW drive, you can use InterVideo WinDVD to play DVDs.
Page 146: Using The Windvd Toolbar
Exploring Your Options Playing DVDs Point to InterVideo WinDVD, then click InterVideo WinDVD. Time slider Playback speed slider Current chapter indicator Current time slot indicator Sample WinDVD video window with the control panel Using the WinDVD toolbar The WinDVD window contains a toolbar at the top and a status bar at the bottom.
Page 147: Using The Windvd Status Bar
Using the WinDVD status bar The time slider enables you to rapidly move forward or backward in the DVD content. Move the time slider to the left to move backward or move it to the right to move forward. The current time slot is indicated on the right side of the status bar.
Page 148: Using The Control Panel Playback Buttons
Exploring Your Options Playing DVDs Playlist Bookmarks Repeat Help button Sample WinDVD control panel You can open a shortcut menu by positioning the cursor anywhere in the WinDVD window, other than over the control panel, then clicking the secondary button. The shortcut menu contains the same features as the control panel, plus the enable caption feature, which displays captions for the hearing impaired.
Page 149 Click this To do this Repeat — repeat the current chapter, if the DVD contains chapters. Otherwise this button repeats the DVD from the begin- ning. When the repeat button is activated, the repeat symbol appears to the left of the chapter number on the control panel counter.
Page 150: Maximizing The Video Window
Exploring Your Options Playing DVDs Click this Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To display the control panel again, double-click anywhere in the video window.
Page 151: Using Playlists
Using playlists TECHNICAL NOTE: The DVD author determines which features the DVD supports. Depending on the DVD format and the computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD. Unsupported features appear gray, and you cannot select them.
Page 152: Loading And Playing Playlists
Exploring Your Options Using playlists Click the File button in the lower-right corner of the window, to indicate that you are creating a playlist of individual files. In the Directory list, select the file you want to play first, and click Add to put it at the top of the playlist.
Page 153: Resuming Normal Playback After Using Playlists
Resuming normal playback after using playlists To resume playing the DVD files in order after using a playlist, click the eject button to open the disc tray, then close it again. The DVD resumes normal playback. Customizing WinDVD You can control several general WinDVD characteristics, such as whether the toolbar and status bar are visible, as well as numerous audio and display features.
Page 154: Setting General Properties
Exploring Your Options Customizing WinDVD Setting general properties You use the General tab to select the region code, the drive letter assigned to the DVD-ROM drive, the autoplay default option, and which WinDVD toolbars are displayed by default. Region coding is part of the protection system for DVD content. It divides the world into six regions.
Page 155: Setting Audio Properties
Status bar is the bar that is displayed at the bottom of the WinDVD video window. Player is the WinDVD control panel. Click OK to save your settings. Setting audio properties TECHNICAL NOTE: The DVD author determines which features the DVD supports. Depending on the DVD format and the computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD.
Page 156 Exploring Your Options Customizing WinDVD Properties dialog box with Audio tab on top In the Audio channels box, select the appropriate speaker mode to match your setup as follows: If you have two speakers, select one of the 2 speaker modes.
Page 157: Setting Display Properties
No vocal does not output vocals to any speaker. Left vocal outputs vocals to left speakers only. Right vocal outputs vocals to right speakers only. Both outputs vocals to both left and right speakers. In the Dolby Pro Logic box, select the Always enable check box to enable Dolby Pro Logic.
Page 158: Using Windvd Advanced Features
Exploring Your Options Using WinDVD advanced features Select the Lock aspect ratio check box to maintain the original aspect ratio when the video window is resized. Otherwise clear the check box. Select the Startup in full screen mode check box to automatically start WinDVD each time with the video window maximized and the control panel hidden.
Page 159 Using WinDVD advanced features control panel. See “Using the WinDVD control panel” on page 147 for help locating the expanded controls button. WinDVD expanded control panel Use this Directional buttons — use to navigate the WinDVD menus, as you would the arrow keys on the keyboard.
Page 160 Exploring Your Options Using WinDVD advanced features Use this To do this Menu button — displays all available menus for the current DVD. Examples of menus are: Root, Audio Language, Subtitles. Use your mouse or the control panel directional buttons to select a menu. Click Resume to resume DVD playback.
Page 161 Using WinDVD advanced features Use this Subtitles — displays a list of all the available language subtitles. This button is enabled only for DVD content that includes subtitles and supports dynamic subtitle information changes. Select the desired language, or select display subtitles in the DVD’s default language.
Page 162: Zooming In
Exploring Your Options Using WinDVD advanced features Zooming in You can zoom in on an area of the WinDVD video window to get a closer look. Click the Zoom button, located in the upper-left corner of the directional button panel. Position the cursor over the top-left corner of the area you want to view in close up.
Page 163: Adjusting The Color Balance
Launching an Internet browser from WinDVD Adjusting the color balance You can adjust the DVD color balance. Click the adjustment button on the main DVD video window toolbar to open the Adjustment dialog box. WinDVD Adjustment dialog box The adjustment dialog box provides another set of sliders for adjusting volume and brightness.
Page 164: Exiting Windvd
Exploring Your Options Exiting WinDVD Exiting WinDVD Click the control panel Exit button, or click the Close button, to exit WinDVD.
Page 165: Chapter 7: Expansion Options
Chapter 7 Expansion Options Your computer is designed to work in the office as well as on the road. This chapter explains how to set up the various optional devices so that your notebook can provide all the convenience of a traditional desktop computer.
Page 166: Connecting External (Optional) Devices
Expansion Options Devices for office computing PC Cards Expansion devices Some are Toshiba devices, others are standard computer components. The devices manufactured by Toshiba can be purchased through Toshiba’s Web site: through the accessories information packaged with your computer. Connecting external (optional) devices You can connect an external PS/2 keyboard or a PS/2 mouse through the PS/2 port on the back of your computer.
Page 167: Using A Mouse
Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s PS/2 mouse/keyboard port supports any PS/2-compatible keyboard. CAUTION: Make sure the computer is off before you attach the external keyboard. Connecting an external keyboard with the computer’s power on can damage the external keyboard, the computer, or both.
Page 168: Connecting A Ps/2 Mouse
Expansion Options Using a mouse Refer to your mouse documentation for configuration information. Connecting a USB mouse To connect a USB mouse, connect the mouse cable to the USB port on the computer. Once connected, the mouse is ready to use. Connecting a PS/2 mouse CAUTION: Make sure the computer is off before you attach the mouse.
Page 169 HINT: When Auto-selected is the default, the computer can’t detect a PS/2 mouse if you connect it after booting the computer. This can be changed in Toshiba Hardware Setup. Click OK. A message appears stating “The changes will take effect next time the machine is rebooted.
Page 170: Using A Printer
Expansion Options Using a printer Using a printer Before you can connect a printer, you must determine whether it requires a parallel, serial, infrared, or a USB interface. Check the printer’s documentation. If you can configure the printer as either a serial or a parallel device, set it up for parallel operation.
Page 171: Setting Up Your Printer
To the computer Identifying the ends of a parallel printer cable Plug the printer’s power cable into a live electrical outlet. See your printer documentation for additional configuration steps. For more information on getting your printer to print, see “Printing your work” on page Setting up your printer Setting up a printer involves selecting a printer driver.
Page 172 Expansion Options Using a printer Sample Printers and Faxes window Click Add Printer. The Add Printer Wizard appears. Sample Add Printer Wizard dialog box Click Next.
Page 173 The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the ® Windows XP Professional operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. If the printer you are setting up: Is not connected to a network, select Local printer attached to this computer.
Page 174: Using An External Monitor
Expansion Options Using an external monitor If you want this printer to be: The default printer, click Yes. Available when specifically requested, click No. Click Next. Click Finish. The Windows page. To complete the setup, click OK. You are now ready to print. Depending on your program, you may see various messages indicating the status of your print job.
Page 175: Connecting The Display Device
(not included with your system). For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 176: Connecting An External Monitor
Expansion Options Using an external monitor Refer to the documentation provided with the device for the location of its television signal-in jack. Connect the other end of the video cable to the television jack on the computer. Connect the external device’s power cable to a live electrical outlet.
Page 177: Directing The Display Output When You Turn On The Computer
Directing the display output when you turn on the computer Once you’ve connected an external display device, you can choose to use the built-in display panel only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press While holding down...
Page 178: Using The Wi-Fi Mini Pci Module
Using the Wi-Fi Your computer may have an integrated Wi-Fi Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. Accessing the Wi-Fi When using your Wi-Fi Mini PCI module, your computer may display a PC Card icon in the desktop’s system tray to indicate that...
Page 179: Using An Expansion Device
Expansion Options Using an expansion device Using an expansion device The expansion port allows you to connect your computer to an expansion device, which is an excellent investment if you’re using your computer both in and out of the office. When you return to your desk, you probably want to connect to your network, print reports from your computer, or use a mouse instead of the AccuPoint II.
Page 180 Expansion Options Using an expansion device - Blank Page -...
Page 181: Chapter 8: Toshiba Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options or change default options. This chapter describes the utilities supplied by Toshiba: Fn-esse Hotkey utility Toshiba Console...
Page 182: Fn-Esse
239. You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse Click Start, point to All Programs, Toshiba Utilities, then click Fn-esse. The Fn-esse keyboard appears. ® program without using the Start menu.
Page 183 Click and hold the primary button as you drag the highlighted item from Explorer to the key on the Fn-esse keyboard to which you want to assign it. Toshiba Utilities Fn-esse ® Explorer (or the program...
Page 184: Using The Keyboard Or Pointing Device To Assign Keys
Toshiba Utilities Fn-esse Release the primary button. Fn-esse displays the Add/Edit Command dialog box with the Description, Command Line and Working Directory fields automatically completed. Click OK to close the Add/Edit Command dialog box with your key assignment in place.
Page 185: Viewing Existing Key Assignments
Fn-esse keyboard. Fn-esse displays the Function Key Assignments dialog box. This box lists all the key assignments and the program or document to which each key is assigned. plus the appropriate key from within any ® program. Toshiba Utilities Fn-esse ®...
Page 186: Changing Or Removing Existing Key Assignments
To remove the key assignment, click Clear. Hotkey utility The hotkey utility allows you to receive a confirmation message when you use the hotkey combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate: Click Start, Toshiba Utilities, then click the Hotkey utility.
Page 187: Toshiba Console
Put a check mark next to the desired option. Click OK. Toshiba Console The Toshiba Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, then click All Programs.
Page 188: Customizing Your Computer
Toshiba Utilities Toshiba Console Sample Toshiba Console window The Toshiba Console offers three categories of features: Customizing Your Computer Network Security Customizing Your Computer The features available in this category are: Power Management Mouse Hotkey assignment (for detailed information, see on page Slim SelectBay &...
Page 189: Network
The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the Toshiba Console, double-click the Power Management icon. The Toshiba Power Saver Properties window appears.
Page 190 You can either use one of the preset modes or create and use your own customized mode. The preset modes cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function.
Page 191: Creating A New Power Mode
Name is the title of the mode you copied. Delete this title, type in the name for your new power mode, then press Customizing a power mode Highlight the mode on the Power Save Modes window. Click Details... Toshiba Utilities Toshiba Console Enter...
Page 192: Slim Selectbay™ And Docking
The Warm Undock service allows you to dock or to remove the computer from the Port Replicator without turning the computer off. Toshiba Mobile Extensions will provide two selections in the Start menu when the computer is docked to the Port Replicator.
Page 193: Slim Selectbay™ Service
Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool available through Windows. To access it, open the Start menu, click Control Panel, then double-click Toshiba HWSetup. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon.
Page 194 Toshiba Utilities Toshiba Hardware Setup The tabs represent various dialog boxes. They are: General—Allows you to view current BIOS, hard disk drive and memory settings Password — Allows you to set the user password and an owner string Device Config — Shows the Device configuration options Parallel/Printer —...
Page 195: Toshiba Power Saver Utility
Any options that you change become effective when you click either OK or Apply. Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings. You can enable hibernation through this utility.
Page 196: Setting User Passwords
Setting a password leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports the several types of passwords on your computer: An instant password — Secures your open programs and files when leaving the computer temporarily A power-on password —...
Page 197: Using An Instant Password
Open the Start menu, click Control Panel, then click Toshiba HWSetup. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon. Select the Password tab. Click Registered. Type your password in the Enter Password box and click OK Type the password again in the Verify Password box and click Click Exit.
Page 198: Disabling A User Password
Open the Start menu, click Control Panel, then click Toshiba HWSetup. NOTE: The Control Panel window must be set to Classic View to access the Toshiba HWSetup icon. Select the Password tab. Click Not Registered. Type your password in the Enter Password box and click OK TECHNICAL NOTE: You have three tries to enter the correct password.
Page 199: Deleting A Supervisor Password
Point to Toshiba Console, then click the resulting Toshiba Console selection. The Toshiba Console window appears. Select Security. Sample Toshiba Console Security window Click the Supervisor password icon. Select Registered. Enter a password (then enter it again to verify). Click OK.
Page 200 Toshiba Utilities Using a supervisor password Select Security. Sample Toshiba Console Security window Click the Supervisor password icon. Select Not Registered. Enter the correct password. Click OK, then click OK again to exit.
Page 201: Chapter 9: If Something Goes Wrong
Toshiba’s support tool VirtualTech to help diagnose and solve possible problems. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 202 If Something Goes Wrong Problems that are easy to fix Press Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 203: Problems When You Turn On The Computer
Problems when you turn on the computer Add a paragraph break and type some notes describing what you were doing when you received the message. Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power.
Page 204: The Windows® Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working The computer displays the The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 205: Using Startup Options To Fix Problems
The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. This section describes each option and when to use the procedure.
Page 206: Internet Problems
If Something Goes Wrong The Windows® operating system is not working See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 207: Resolving A Hardware Conflict
Then do one or both of the following: In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions. Click a problem you would like help with from the listings and follow the on-screen instructions.
Page 208: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task.
Page 209: Fixing A Problem With Device Manager
For an older device, remove it from the computer. Disable another system component and use its resources for the new device, see Manager” on page Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device.
Page 210: Checking Device Properties
If Something Goes Wrong Resolving a hardware conflict You are given the option of disabling the device. Click yes or no, whichever is appropriate. Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device.
Page 211: Memory Problems
Click troubleshooting. A Help and Support window for that device appears. For more information about Device Manager, refer to Windows XP online help. Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, then click Turn Off Computer.
Page 212 If Something Goes Wrong Resolving a hardware conflict Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adapter and power cable. Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer.
Page 213: Keyboard Problems
The battery appears not to power the computer for as long as it usually does. If you frequently recharge a partially charged battery, it may not charge fully. Let the battery discharge completely, then try charging it again. Check the power options using the Power Management utility. Have you added a device, such as a PC Card or memory module, that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically?
Page 214 If Something Goes Wrong Resolving a hardware conflict The display is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing simultaneously. If you have registered a password, press , type the password and press Enter key registered, press...
Page 215: Disk Drive Problems
The built-in screen flickers. Some flickering is a normal result of the way the screen produces colors. To reduce the amount of flickering, try using fewer colors. To change the number of colors displayed: Point at the desktop and click with the secondary button. Click Properties, and then the Settings tab.
Page 216 If Something Goes Wrong Resolving a hardware conflict a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing.
Page 217 this, click Start, then click All Programs, point to Accessories and System Tools, and click Disk Defragmenter. Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer.
Page 218: Dvd-Rom Or Dvd-Rom/Cd-Rw Drive Problems
If Something Goes Wrong Resolving a hardware conflict Error-checking on the faulty diskette (for instructions, see drive problems” on page DVD-ROM or DVD-ROM/CD-RW drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place.
Page 219 followed by gold-colored CD-ROM. Green-colored CD-ROMs are the least reliable. WinDVD problems: general issues ™ WinDVD has been configured to provide optimum performance and quality based upon your system’s available resources. Changes made to the system or its configuration may impact the playback performance of the WinDVD player.
Page 220 If Something Goes Wrong Resolving a hardware conflict change your operating system, check with your PC manufacturer or your graphics card vendor to ensure that you have the appropriate drivers for both your hardware (for example, the graphics card) and software (drivers must support the operating system and DVD with WinDVD).
Page 221: Minimum System Requirements
WinDVD will not function properly with “debug” software installed. The WinDVD application will not function properly if it detects that debug software is present on the system. Remove the debug software to restore functionality of WinDVD. Minimum system requirements WinDVD performs best when these recommended components are present in your system: Sound card (with 48 KHz sampling rate support) ®...
Page 222 If Something Goes Wrong Resolving a hardware conflict Error message and additional information ® Microsoft components are missing. ® Microsoft not installed properly on the system. No audio subsystem could be found for playback. There is a problem with the audio card or audio compo- nent within the system.
Page 223 Error message and additional information The audio settings are incorrect. Please check sound card or drivers. The audio card was found, but there is a problem with the audio card or drivers. The wrong audio driver may be installed in the sys- tem.
Page 224 If Something Goes Wrong Resolving a hardware conflict Error message and additional information This DVD disc cannot be played in this region. The selected region cannot be used due to one of the following: The Region Code of WinDVD and the DVD disc do not match.
Page 225: Sound System Problems
Error message and additional information This file appears to contain unsupported data. The drive or disc cannot be found. This may be caused by one of the following: No disc in the DVD-ROM drive. No DVD-ROM drive. A disc of an unsupported type in the DVD-ROM drive.
Page 226: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict Mixer Utility (default Enabled), may cause feedback. Revert to the default settings. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards.
Page 227 PC Card checklist Make sure the card is inserted properly into the slot. “Using PC Cards” on page 98 how to insert PC Cards. Make sure all cables are securely connected. Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine.
Page 228 If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address.
Page 229: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 230: Modem Problems
If Something Goes Wrong Develop good computing habits Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack.
Page 231: Hard Disk
Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See page 81 for instructions.
Page 232: Using Virtualtech
To load an update, click yes. Run a detailed system report that harvests and compiles your system’s hardware and software information. This report is also accessible to Toshiba’s InTouch Center technicians to reference when you place a call or send a question electronically.
Page 233: Before You Call
Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 234: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred. Exact error messages and when they occurred. For technical support, call the Toshiba InTouch Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 235: Toshiba's Worldwide Offices
Carrera 129, Nro. 2957 Parque Industrial de Occidente Bodega 30 - Zona Fontibón Santa Fe de Bogotá, Colombia If Something Goes Wrong Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V.
Page 236 If Something Goes Wrong Toshiba’s worldwide offices Denmark Scribona Danmark A/S Naverland 27 DK2600 Glostrup Denmark France Toshiba Systèmes (France) S.A. 7, Rue Ampère 92804 Puteaux Cédex France Greece Ideal Electronics S.A. 109 Syngrou Avenue 176 71 Kalithea Athens Greece...
Page 237 Kalbakken 0901 OSLO 9 Norway Poland TECHMEX S.A. ul. Partyzantów 71, 43-316 Bielsko-Biala 01-059 Warszawa Poland Singapore Toshiba Singapore Pte. Ltd. 438B Alexandra Rd. # 06-01 Alexandra Technopark Singapore 119968 Slovenia Inea d.o.o. Ljubljanska 80 61230 Domzale Slovenia Sweden Scribona PC AB Sundbybergsväegen 1...
Page 238 Switzerland United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park...
Page 239: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 240: Without A Password
Hot Keys Instant password security Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the mouse or any key will make the display reappear. For information on setting a power-on password, see “Setting user passwords”...
Page 241: Power Usage Mode
Sample power usage modes ® The power usage mode in the Windows operating system under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. For more information, see “Power Management” on page 115.
Page 242: Stand By Mode
Hot Keys Stand By mode Stand By mode This hot key puts the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it doesn’t display. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Standby”...
Page 243: Hibernation Mode
Hibernation mode This hot key puts the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it doesn’t display.
Page 244: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In o resolution of the internal display panel to match the resolution of the external display device. Display brightness This hot key decreases the screen brightness. This hot key increases the screen brightness.
Page 245: Enabling A Wireless Device
Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer (for systems with Wi-Fi only). The wireless modes you can toggle between are: Sample wireless modes window Keyboard hot keys This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off.
Page 247: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 248 - Blank Page -...
Page 249: Appendix C: Video Modes
Appendix C Video Modes This appendix lists the video modes supported by the computer display adapter, and identifies the characteristics of each mode. The columns of the following tables are defined as follows: Type identifies the display adapter that first supported the mode, and specifies whether the mode is text or graphics.
Page 250: Video Modes
Video Modes Type Resolution 640 x 480 800 x 600 1024x 768 1280x 1024 1600x 1200 LCD colors CRT Colors 16/256/64K/16M 16/256/64K/16M 256/64K/16M 256/64K/16M 256/64K/16M 256/64K/16M 256/64K/16M 256/64K/16M (virtual display) 256/64K 256/64K/ (virtual display) Max Vertical Refresh Rate (CRT) 60/75/85Hz non-interlaced @ 16M colors 60/75/85Hz...
Page 251: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS...
Page 252 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct current direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table...
Page 253 SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 254 Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 255 byte — A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory.
Page 256 Glossary controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 257 disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive —...
Page 258 Glossary emulation — A technique in which a device or program imitates another device or program. enable — To turn on a computer option. See also disable. executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension.
Page 259 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 260 Glossary interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device — See device. Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services.
Page 261 megabyte (MB) — A unit of data equal to 1,048,576 bytes (1024 x 1024 bytes). See also bytes. memory — Typically refers to the computer’s main memory, where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM.
Page 262 Glossary online — Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet. operating system —...
Page 263 program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date.
Page 264 Glossary serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel. shortcut —...
Page 265 Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the IEEE 2.11b communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet.
Page 266 - Blank Page -...
Page 267: Index
Index Numerics 101-key keyboard 83 AC adapter 45 DC IN socket 29 plugging in 29 AC power cable connectors 247 AC power light 36 accessories carrying cases 102 devices 70 docking solutions 64 memory 64 AccuPoint II 60 AccuPoint II pointing device 36 adapter, AC 29 Add Printer Wizard 171 adjusting recording quality 143...
Page 268 Index storing spare packs 123 unlocking 121 battery alarms 119 battery life maximinzing 123 battery lock 33 battery module 33 battery power displaying remaining 118 monitoring 117 running the computer on 116 battery, light 37 Bluetooth modules inserting and removing 76 Bluetooth power switch 32 button internet 50...
Page 269 critical applications 2 Ctrl keys 84 cursor control light 37 desktop major features 127 desktop exploration 127 desktop icons 128 device expansion 64 Device Manager 209 checking properties 210 disabling a device 209 device, serial 30 devices keyboard 59 memory module 65 mouse 60 DirectX Foundation 221 disconnection...
Page 270 Index problem with display settings/ current settings not working with hardware 215 program has performed an illegal operation 202 warning resume failure 204 WinDVD 221 Error-checking 216 Ethernet LAN port 134 expansion capability 64 expansion device 64 expansion memory cover 34 expansion port 179 exploring the desktop 127 Export Administration regulation 11...
Page 271 25 internet explorer 129 my computer 128 my desktop 128 network neighborhood 128 note 24 recycle bin 129 technical note 25 Toshiba Virtual Tech 129 warning 24 icons Windows XP Professional desktop 128 icons, safety 24 indicator panel keyboard 36...
Page 272 Index removing 186 key assignment viewing exising 185 key assignments changing or removing exisiting keyboard 35 character keys 83 connecting 166 function keys 84 hot keys 245 not working 203 overlay keys 85 PS/2-compatible 30 unexpected characters 213 Windows special keys 85 Keyboard and display features 34 keyboard features 34 keyboard indicator panel 36...
Page 273 not working 214 using an external 174 mouse installing 60 PS/2-compatible 30 serial 60 using 167 mouse, serial 30 my computer icon 128 my desktop icon 128 network 189 accessing 134 Dial-Up Networking Wizard 134 network neighborhood icon 128 network port 30 networking wireless 133 numlock light 38...
Page 274 218 computer hangs when PC Card inserted 228 computer will not power up 203 contacting Toshiba 233 corrupted/damaged data files 217 Device Manager 209 disabling a device 209 disk drive is slow 216 display is blank 214...
Page 275 external monitor 214 faulty memory 211 hardware conflict 207 high-pitched noise 225 illegal operation 202 Internet bookmarked site not found 206 Internet connection is slow 206 InTouch Center 232 keyboard not responding 203 keyboard produces unexpected characters 213 missing files/trouble accessing a disk 216 modem not receiving or transmitting 230 no sound 225 non-system disk or disk error 204...
Page 276 PS/2 keyboard external, connecting 166 PS/2 mouse connecting 166 using simultaneously with AccuPoint II 168 real-time clock (RTC) battery 116 rear panel, closed, back 29 rear panel, open, back 30 recording .wav files 142 sounds 142 recording quality 143 recording sounds 142 recycle bin icon 129 region code 154 regulatory information 8...
Page 277 removing 77 SD Media card slot 32 seating 41 Secure Digital cards 76 security 189 security lock slot 31 selecting a place to work 39 SelectServ 26 serial mouse connecting 166 serial port 30 service options 26 setting up adding memory 64 setting up a connection 134 setting up software 50 setting up your computer 44...
Page 278 speakers external, connecting 63 using external 144 Stand By mode hot key 242 Standby 105 Standby mode going into more quickly 111 starting again from 113 start button 129 starting a program 87 Run dialog box 89 Windows Explorer 88 Windows Start menu 87 starting up the computer from Shut down 108...
Page 279 Toshiba Accessories information 25 Toshiba Console 187 Toshiba Forum 233 Toshiba Hardware Setup 193 Toshiba Internet Web sites 234 Toshiba online resources 113 Toshiba online services 233 Toshiba Power Saver utility 195 Toshiba utilities 181 Toshiba Virtual Tech icon 129...
Page 280 Power Management 189 Toshiba Power Extensions 195 utility Toshiba Power Saver 195 video cables 56 video display device connecting 56 video limitations 58 video modes 249 characteristics 249 video projector adjusting display 58 video window 150 video-out port 31...
Page 281 problem solving 204 Windows XP Professional 50 Windows XP Professional Briefcase 130 Windows XP Professional desktop icon 128 Windows XP Professional taskbar 130 Windows® XP Professional desktop 127 WinDVD advanced features 158 controls are disabled 219 customizing 153 error messages 221 exiting 164 launching an Internet browser from 163 not functioning properly 221...

This manual is also suitable for:

Satellite pro 6000 series

Toshiba 6000 User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Connecting Other External Devices

Chapter 4: Learning the Basics

Chapter 5: Power Management

Chapter 6: Exploring Your Options

Chapter 7: Expansion Options

Chapter 8: Toshiba Utilities

Chapter 9: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Appendix C: Video Modes

Quick Links

Related Manuals for Toshiba 6000

Summary of Contents for Toshiba 6000