Step 6. Is Base Receiver Tracking Satellites; Step 7. You May Have A Component That Is Malfunctioning - ashtech Z-Xtreme System Manual

For rtk surveying
Hide thumbs Also See for Z-Xtreme:
Table of Contents

Advertisement

Coordinates not entered correctly
1. Set the correct base system position. Using either the field application
software or the front panel of the receiver, set the base receiver position.
Coordinates entered correctly
Go to step 6 below.

Step 6. Is base receiver tracking satellites?

The base GPS receiver must be tracking satellites in order to collect the data required
for the radio to transmit. If the base receiver is not tracking at least 4 healthy satel-
lites, no data will be sent to the radio. Use either the front panel of the receiver or the
field application software to determine if the base receiver is tracking satellites.
Receiver not tracking satellites
Refer to GPS receiver does not track satellites above for steps on how to
troubleshoot this problem.
Receiver tracking satellites
Go to step 7 below.
Step 7
You may have a component that is malfunctioning
.
You may have a malfunctioning radio or radio communication cable.
If using Pacific Crest UHF/VHF radios, it is not possible to further isolate the problem.
Contact your local dealer or Ashtech customer support for assistance.
If using the external Ashtech SSRadio, follow these steps to isolate the problem com-
ponent.
1. Replace the radio cable with the one from the rover system. If the radio
begins to transmit data, there is a problem with the base radio cable. Contact
your local dealer or Ashtech customer support for assistance.
2. If the cable swap fails to identify the problem, replace the radio with the one
found in the rover system. If the radio begins to transmit data, there is a
problem with the base radio. Call your local dealer or Ashtech customer
support for assistance.
a. Your base GPS receiver may be malfunctioning. Follow these steps to
determine if the base receiver is the problem.
(i).
Replace the base GPS receiver with rover GPS receiver.
(ii).
Follow the steps outlined above to set up the rover receiver as an
RTK base.
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents