Warehouse Stock Control; Inserting Stock Quantity By Department; Inserting Stock Quantity By Item (Plu) - Olivetti NETTUN@3000 User Manual

WAREHOUSE STOCK CONTROL

To enable stock control by department and by PLU, for code SET 102 (for
departments) and code SET 801 (for items) you must enable the option
•
STOCK QUANT. = 1.
Subsequently, when you insert items into the cash register using codes SET 401 and
SET 802, you can also enter the quantity in stock.

INSERTING STOCK QUANTITY BY DEPARTMENT

When programming SET 401 the following item is available:
Stock Number from 0 to 9999
Note: if you do not want stock control to be applied to a given sales item, just leave
the value 0.

INSERTING STOCK QUANTITY BY ITEM (PLU)

When programming SET 802 the following item is available:
Stock Number from 0 to 9999
Note: if you do not want stock control to be applied to a given sales item, just leave
the value 0.
Note: Enabling stock control by Department, the department report indicates the
total number sold by department and not the total quantities sold by PLUs
linked with that department. In this case, the quantities sold by PLUs are
given in the PLU_BCR report.
Note: When stock control is enabled and an item is running out of stock, a message
appears "Item below stock".
38