Selecting An Operator - Olivetti NETTUN@3000 User Manual

SELECTING AN OPERATOR

To access the environment, select F (Functions) > ECR Functions then Operator.
In this screen you can select the operator required, then activate them by selecting
"Apply selected operator".
Key
Shift closre
Suspend operator
*
( )
(T)
Apply selected
operator
12
Exits from the operator selection environment.
Terminates the activity of the selected operator, printing the activity
report of the operator.
Temporarily suspends the activity of an operator. To access the cash
register, the operator must be selected and their identification code
entered.
*
The symbol indicates which operators use a password for accessing
the cash register.
The letter T indicates that the operator is enabled to use Training
mode.
Note: if no symbol appears, as for Operator_1 in the screen, it means
that the operator is enabled for Normal mode but no password is
assigned.
Applies the operator selected in the list.
Description