DEPT/PLU FAST ACCESS PROGRAMMING
To be able to use the keypad in Dept/PLU mode, select the keypad type from the
environment F (Functions) > General Functions > Config. > Machine
Configuration > [Dept/PLU] key.
To add or modify a department, select F (Functions) > General Functions >Config >
User Interface Configuration, followed by [Depts/PLU Config.].
F
03.03.2012
18.10 Till No.: 1
Vch: ON Pr.list 1 Operator: Disabled
From this environment you can enter the items (PLUs) and the departments directly,
in visual mode (this method is equivalent to programming in Set mode using the
commands SET 401 and SET 802).
15