OPERATOR FUNCTION ACCESS CONTROL
With the (default) factory settings, the cash register can handle up to 10 operators
each of whom can be assigned one of 8 hierarchical levels (known as operating
profiles).
To perform these types of operations on operators, you must:
•
program the personal details and profile for each operator (SET 601 code in SET
mode)
•
manage the functions that can be performed by each operator (by associating an
operating profile with each operator).
•
enable operator management (SET 370 code in SET mode).
SET 601 – OPERATOR TYPE
This function is used to program the personal information for each operator
(description, access code, etc..) and their operating profile
Note: The dimension of the programming fields depend on the value set using
option 102.
Operating Procedure
[OPERATOR "n"]
[OPERATOR NAME]
[OPERATING PROFILE]
To apply the settings, exit from the SET environment by pressing the key
To exit from SET 601 programming, press the [Total.] key.
.6. .0. 1. .X.
Enter a number from 1 to 10
.X.
Enter a numeric code comprised of a maximum of
[PERS. CODE]
.X.
4 figures, or no number.
Enter the name to be assigned to the operator
.X.
Enter an operating profile for the operator,
.X.
choosing a number between 0 and 7:
0 = Lev. Supervisor
1 = Lev. Cashier
2 = Lev. Operator 1
3 = Lev. Operator 2
4 = Lev. Operator 3
5 = Lev. Operator 4
6 = Lev. Operator 5
7 = Lev. Operator 6
0 = DisablesTraining Mode
[TRAINING]
.X.
1 = Enables Training Mode
0 = Disables the operator
[ENABLE]
.X.
1 = Enables the operator
.
9