Programming List; Executing The Set Command From The Programming List - Olivetti NETTUN@3000 User Manual

PROGRAMMING LIST

The cash register can be programmed from the Programming environment which can
be accessed from the main Sales screen by selecting the [F] (Functions)>
GENERAL FUNCTIONS environment followed by the [Config] > [Set setup] keys.
From this environment, using the [Prog. List] key, you can display a list of all the
functions available on the cash register for programming, and the code to use for
enabling the function.
F
03.03.2012 18.10 Till No.: 1
Vch: ON Pr.list 1 Operator: Disabled
Exec
Note: The programming functions that can be used by the user are listed below.

EXECUTING THE SET COMMAND FROM THE PROGRAMMING LIST

A command can be selected from F (Functions) > General Functions
environment > Config > Set setup > [Program. List].
From the list of SET programming commands you can execute a command directly
by simply touching the command line or its description followed by the Exec key with,
therefore, direct access to the programming environment.
29