Olivetti NETTUN@3000 User Manual page 39

Item
Operation reports
VAT variation
mandatory reports
Report (Z10)
Printing active/ not
active
Automatic report
WITHOUT zeroing
Automatic report
WITH zeroing
Note: if operators are active, an additional key, Training not active/Training active,
appears in the reports screen allowing you to select the report printing mode
(Training or No training).
Prints management reports related to cash register transactions
(this key is active only when the Management Report with Reset
tab is selected).
Prints the set of reports that must be printed before varying the rates
in the VAT table (with zeroing after printing).
Prints the daily Z10 report with zeroing.
Enabled only when "Reports with Reset" is selected. Reports are
generated and printed on the printer (for printing active), otherwise
they are generated but not printed.
Prints all the reports specified using the option SET 315 but without
zeroing. For more information, refer to the chapter "SET 315 – X
MODE AUTOMATIC REPORT MANAGEMENT".
Prints all the reports specified using the option SET 316 with zeroing.
For more information, refer to the chapter "SET 316 - Z MODE
AUTOMATIC REPORT MANAGEMENT".
Closes this window and returns to the Functions environment.
Description
35