Drive Axles - Arctic Cat 2015 400 Service Manual

 NOTE: Prior to installing the seal, apply High Perfor-
mance #2 Molybdenum Disulphide Grease to the seal
outside diameter.
4. Using an appropriate seal installation tool, evenly
press the seal into the cover bore until seated.
CAUTION
Make sure the tool is free of nicks or sharp edges or the
seal will be damaged.
5. Repeat steps 1-4 for the opposite side.
INSTALLING DIFFERENTIAL
1. Align the input flange with the front output flange;
then place the differential into position on the frame
and install the cap screws and nuts. Tighten to 38
ft-lb.
2. Install the cap screws securing the flange couplers
together and tighten to 20 ft-lb.
CC901
3. Install the front axles.
GC060
4. Install the wheels and tighten to 40 ft-lb (steel) or 80
ft-lb (aluminum).
5. Pour 275 ml (9.3 fl oz) of SAE 80W-90 hypoid gear
lubricant into the differential and install the filler
plug. Tighten to 16 ft-lb.
6. Remove the ATV from the support stand.
REMOVING REAR DRIVE AXLE
1. Secure the ATV on a support stand to elevate the
wheels.
KC488

Drive Axles

AG925
AF610D
AF897D
105