Periodic Maintenance; Lubrication Points; Air Filter - Arctic Cat 2015 400 Service Manual

Periodic Maintenance

This section has been organized into sub-sections which show
common maintenance procedures for the Arctic Cat ATV.
SPECIAL TOOLS
A number of special tools must be available to the techni-
cian when performing service procedures in this section.
Refer to the current Special Tools Catalog for the appro-
priate tool description.
Description
Compression Tester Kit
Oil Filter Wrench
Tachometer
Timing Light
Valve Clearance Adjuster
 NOTE: Special tools are available from the Arctic
Cat Service Department.

Lubrication Points

It is advisable to lubricate certain components periodi-
cally to ensure free movement. Apply light oil to the
components using the following list as reference.
A. Throttle Lever Pivot/Cable Ends
B. Brake Lever Pivot/Cable Ends
C. Auxiliary Brake Cable Ends

Air Filter

CLEANING AND INSPECTING
FILTER
1. Rotate the three locking tabs free of the lugs on the
air filter cover; then rotate the cover forward and
away from the filter housing.
6
p/n
2. Remove the foam filter element from the air filter
0444-213
housing and separate the foam element from the
spring.
0644-389
0644-275
0644-296
0444-178
3. Fill a wash pan larger than the element with a
non-flammable cleaning solvent; then dip the ele-
ment in the solvent and wash it.
 NOTE: Foam Air Filter Cleaner and Foam Air Filter
Oil are available from Arctic Cat.
4. Dry the element.
KC0056A
KC147
KC148
KC143