Arctic Cat 2015 400 Service Manual page 37

6. Remove the cap screws securing the exhaust pipe to
the cylinder head; then disconnect the exhaust pipe
to muffler springs and remove the exhaust pipe.
Account for a grafoil seal and seal ring.
7. Disconnect the gear position switch, starter cable,
and engine ground cable; then disconnect the trigger
coil and stator coil connectors.
KC235
KC236
8. Remove the front and rear V-belt cooling boots from
the V-belt housing.
9. Remove the cap screws from the front and rear out-
put flanges; then remove the front and rear engine
mounting through-bolts.
KC170
KC238
KC228C
KC228B
KC242
KC243
35