Call Forwarding "After Delay; Call Forwarding For Other Users - Aastra OpenCom 100 Quick Reference Manual

Call Forwarding "After Delay"

For internal and external calls
H*61*
On:
time in seconds, e. g.
H#61#
Off:
Only for internal calls
H*611*
On:
of time in seconds, e. g.
H#611#
Off:
Only for external calls
H*612*
On:
of time in seconds, e. g.
H#612#
Off:
Calls (only internal, only external or both types) are signalled at the selected terminal
and after the specified period of time, these calls are forwarded to another specified
terminal.

Call Forwarding for Other Users

In order to program call forwarding for call numbers of other users, you must have the
"Call forwarding for other user" authorisation. Also, you can only configure call for-
warding only for those users whose terminal have not been blocked for this type of
access (these users will themselves have the authorisation "Prevent call forwarding by
other user"). Please consult your system administrator if you have questions regarding
these authorisations.
Call forwarding for call numbers of other users always apply for internal and external
calls.
Immediately
H*214* Z
On:
H#214* Z
Off:
Calls for the user will immediately be forwarded to the other terminal. When the user
pick ups their headset they hear the special dialling tone.
22
(external access code, e.g.
20 #
)
(external access code, e.g.
20 #
)
(external access code, e.g.
20 #
)
(user's internal call no.)
(user's internal call no.)
0 Z
) (destination no.)
0 Z
) (destination no.)
0 Z
) (destination no.)
*Z
(destination no.)
#
* Z
(period of
* Z
(period
* Z
(period
#