CyberData 011097 Operation Manual page 45

2. On the Sensor Configuration page, enter values for the parameters indicated in
Web Page Item
Sensor Settings
Sensor Normally Closed
Activate Relay
Play Audio Locally
Play Audio Remotely
Dial Out Extension
3. After changing the parameters, click Save Settings.
Operations Guide
Table 2-16. Sensor Configuration Parameters
Description
Select the inactive state of the sensors.
Check this box to activate the relay until the sensor is
deactivated.
Check this box to loop an audio file until the sensor is
deactivated.
Check this box to make only one call to a preset extension
and play a pre-recorded audio file repeatedly.
Enter the dial-out extension number.
Use this button to test the sensor.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930362L
Installing the VoIP V2 Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters
CyberData Corporation
37
Table 2-16.