Configuring Access Control Rules; Configuring Additional Snmp Information - Cisco RV180 Administrator's Manual

Administering Your Cisco RV180/RV180W
Configuring Network Management
STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 1
STEP 2
Cisco RV180/RV180W Administration Guide
Enter the community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
Click Save.

Configuring Access Control Rules

The SNMP v1/v2c Access Control Table is a table of access rules that enables
read-only or read-write access for select IP addresses in a defined SNMP agent's
community.
To configure access control rules:
In the SNMP v1/v2c Access Control Table, click Add.
Enter the IP Address of the specific SNMP manager or trap agent on which to
create an access rule.
Enter the subnet mask used to determine the list of allowed SNMP managers.
Enter the community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
Choose the access type. The SNMP manager or trap agent can either be allowed
to read and modify all SNMP accessible settings (rwcommunity) or be given read-
only access (rocommunity).
Click Save.

Configuring Additional SNMP Information

To configure additional SNMP information:
Choose Administration > Network Management > SNMP System Information.
You can enter the following information:
• SysContact—Enter the name of the contact person for this router. Examples:
admin, John Doe.
• SysLocation—Enter the physical location of the router. Example: Rack #2, 4th
Floor.
7
138