Configuring Access Node Control Protocol; On Cisco Asr 9000 Series Routers - Cisco ASR 9000 Series Configuration Manual

Aggregation services router modular quality of service
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Configuring Access Node Control Protocol

on Cisco ASR 9000 Series Routers

Access Node Control Protocol (ANCP) creates a control plane between a service-oriented aggregation
device and an access node (AN) (for example, a DSLAM) in order to perform QoS-related,
service-related, and subscriber-related operations. An ANCP server accepts and maintains ANCP
adjacencies (sessions with an ANCP neighbor), and sending and receiving ANCP messages. ANCP
allows static mapping between ANCP ports and VLAN subinterfaces so that DSL rate updates for a
specific subscriber received by the ANCP server are applied to the QoS configuration corresponding to
that subscriber. DSL train rates received via ANCP are used to alter shaping rates on subscriber-facing
interfaces and subinterfaces on the Cisco ASR 9000 Series Router. ANCP runs as a single process on the
route processor (RP).
This module provides the conceptual and configuration information for implementing ANCP on
Cisco ASR 9000 Series Aggregation Services Routers.
For additional conceptual information about Quality of Service (QoS) in general and complete
Note
descriptions of the QoS commands listed in this module, see the
module. To locate documentation for other commands that might appear in the course of executing a
configuration task, search online in the Cisco IOS XR software master command index.
Feature History for Configuring ANCP on Cisco IOS XR Software
Release
Release 3.7 FCI
Contents
OL-17239-01
D r a f t — C i s c o C o n f i d e n t i a l
Modification
This feature was introduced on Cisco ASR 9000 Series Routers.
Prerequisites for Configuring ANCP on Cisco ASR 9000 Series Routers, page 80
Restrictions for Configuring ANCP on Cisco ASR 9000 Series Routers, page 80
Information About Configuring ANCP on Cisco ASR 9000 Series Routers, page 80
How to Configure ANCP on Cisco ASR 9000 Series Routers, page 82
Configuration Examples for Configuring ANCP on Cisco ASR 9000 Series Routers, page 92
Additional References, page 99
Cisco ASR 9000 Series Aggregation Services Routers Modular Quality of Service Configuration Guide
"Related Documents"
section of this
QC-79

Advertisement

Table of Contents
loading

Table of Contents