Cisco RV180 Administrator's Manual page 149

Administering Your Cisco RV180/RV180W
Configuring the WAN Traffic Meter
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV180/RV180W Administration Guide
To restart the traffic counter:
Choose Administration > WAN Traffic Meter.
Under Traffic Counter, select Restart Now, or Specific Time, and enter the time you
want the traffic counter to restart.
(Optional) Check the box to send an email report containing the traffic meter
statistics before the counter is reset.
Click Save.
To configure what the Cisco RV180/RV180W does when the traffic limit is
reached:
Choose Administration > WAN Traffic Meter.
Under When Limit Is Reached, select one of the following:
• Block All Traffic—All traffic to and from the Cisco RV180/RV180W is
blocked.
• Block All Traffic Except E-Mail—Only email is allowed to and from the
Cisco RV180/RV180W.
(Optional) Check the box to send an email alert when the traffic limit has been
reached and traffic is being blocked.
Click Save.
To view traffic statistics, choose Administration > WAN Traffic Meter. Under WAN
(Internet) Traffic Statistics, information is displayed about WAN traffic to and from
the Cisco RV180/RV180W.
7
140