Configuring Bonjour; Configuring Upnp - Cisco RV180 Administrator's Manual

Administering Your Cisco RV180/RV180W
Configuring the Discovery Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV180/RV180W Administration Guide

Configuring Bonjour

Bonjour is a service advertisement and discovery protocol. To configure Bonjour:
Choose Administration > Discovery Settings > Discovery - Bonjour.
Check the Enable box to enable Bonjour on the router. Unchecking this will disable
Bonjour.
In the Bonjour Interface Control Table, you can see on which VLANs Bonjour is
enabled. For example, Bonjour is by default enabled on the default VLAN ID 1. That
means that the Cisco RV180/RV180W advertises itself to all devices connected to
it on VLAN 1, and devices joining the network can connect to the Cisco RV180/
RV180W. If you have other VLANs created on your network, you can enable
Bonjour on those VLANs too. (See
page 35 for more information.)
Click Save.

Configuring UPnP

Universal Plug and Play (UPnP) is a networking protocol that allows devices to
discover each other and communicate on the network. To configure UPnP:
Choose Administration > Discovery Settings > Discovery - UPnP.
Check Enable to enable UPnP.
In the Advertisement Period field, enter the number of seconds to specify how
often this router will broadcast its UPnP information to all devices within range.
In the Advertisement Time to Live field, enter the number of seconds for the
advertisement to be active.
Configuring Virtual LAN (VLAN) Membership,
7
146