Cisco RV180 Administrator's Manual page 168

Viewing the Cisco RV180/RV180W Status
Viewing the System Summary
STEP 3
Cisco RV180/RV180W Administration Guide
If applicable, to change a system setting, click its corresponding Edit link.
The System Summary page displays this information:
System Information
Host Name
Firmware Version
Firmware MD5
Checksum
PID VID
Serial Number
LAN (Local Network) Information
MAC Address
IPv4 Address
IPv6 Address
DHCP Server
DHCP Relay
DHCPv6 Server
The name of the device.
Current software version the device is running.
The message-digest algorithm used to verify the
integrity of files.
Product ID and vendor ID of the device.
The serial number of the device.
The MAC address of the device.
The IP address and subnet mask of the device.
The IP address and subnet mask of the device
(shown only if IPv6 is enabled).
The status of the router's DHCP server
(enabled or disabled). If it is enabled, DHCP client
machines connected to the LAN port receive their
IP address dynamically.
Indicates if the device is acting as a DHCP relay.
Indicates if the device's DHCPv6 server is enabled
or disabled. If it is enabled, DHCPv6 client systems
connected to the LAN port receive their IP address
dynamically.
8
159