Configuring Remote Logging - Cisco RV180 Administrator's Manual

Administering Your Cisco RV180/RV180W
Configuring Logging
STEP 5
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
Cisco RV180/RV180W Administration Guide
Click Save.

Configuring Remote Logging

To configure remote logging:
Choose Administration > Logging > Remote Logging Configuration.
In the Remote Log Identifier field, enter a prefix to add to every logged message
for easier identification of the source of the message. The log identifier will be
added to both e-mail and Syslog messages.
Click Save.
Configuring Email Logging
Choose Administration > Logging > Remote Logging Configuration.
Select the check box to enable e-mail logs. Then enter the following:
• E-mail Server Address—Enter the IP address or Internet Name of an SMTP
server. The router will connect to this server to send e-mail logs when
required.
• SMTP Port—Configure the port to connect smtp server.
• Return E-mail Address—Enter the e-mail address where the replies from the
SMTP server are to be sent (required for failure messages).
• Send To E-mail Address(1)—Enter the e-mail address where the logs and
alerts are to be sent.
• Send To E-mail Address(2)—Enter the e-mail address where the logs and
alerts are to be sent.
• Send To E-mail Address(3)—Enter the e-mail address where the logs and
alerts are to be sent.
7
144