Cisco RV180 Administrator's Manual page 170

Hide thumbs Also See for RV180:
Table of Contents

Advertisement

Viewing the Cisco RV180/RV180W Status
Viewing the System Summary
Cisco RV180/RV180W Administration Guide
WAN (Internet) Information (IPv6)
Connection Time
Connection Type
Connection State
IP Address
Gateway
DNS Server
Release/Renew
Connect/Disconnect
Wireless Information (Cisco RV180W)
Operating Frequency
Wireless Network Mode
Channel
The time duration for which the connection is up.
Indicates if the WAN IPv6 address is obtained
dynamically through a DHCP server, assigned
statically by the user, or obtained through a PPPoE/
PPTP/L2TP ISP connection.
Indicates if the WAN port is connected to the ISP.
The IP address of the WAN port.
The gateway IP address of the WAN port.
DNS server IP address of the WAN port.
Visible if automatic configuration - DHCP is
connected as the Internet connection type. Click
Release to release the current IP address that was
assigned to your WAN port. Click Renew to obtain
a new IP address for your WAN port.
Visible if an Internet connection type other than
automatic (DHCP) has been chosen. Click Connect
to connect to the selected server. Click Disconnect
to disconnect from the server to which you are
connected.
Displays the operational frequency band.
Displays the Wi-Fi mode of the radio (for example,
N or N/G).
Displays the current channel in use by the radio.
8
161

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rvrv180w

Table of Contents