Cisco RV180 Administrator's Manual page 111

Configuring the Firewall
Firewall Configuration Examples
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco RV180/RV180W Administration Guide
Example 4: Block traffic by schedule if generated from specific range of
machines
In this example, you want to block all HTTP traffic on the weekends if the request
originates from a specific group of machines in the LAN having a known range of
IP addresses, and anyone coming in through the Network from the WAN (i.e. all
remote users).
Setup a schedule. Choose Firewall > Advanced Settings > Schedules.
Click Add.
Enter the schedule name (for example, "Weekend").
Under Time, check All Day.
Under Repeat, leave Everyday unchecked.
Check Saturday and Sunday.
Click Save.
Create an outbound access rule with the following parameters:
Parameter
Connection Type
Action
Schedule
Service
Source IP
Start
Finish
Destination IP
Rule Status
Value
Outbound
Block by Schedule
Weekend
HTTP
Address Range
starting IP address
ending IP address
Any
Enabled
4
102