Cisco RV180 Administrator's Manual page 129

Configuring Virtual Private Networks (VPNs) and Security
Configuring Advanced VPN Parameters
STEP 2
STEP 3
STEP 4
Cisco RV180/RV180W Administration Guide
is subject to the inter-VLAN routing settings. For example, if PPTP clients are
on VLAN 3, and VLAN 2 prevents inter-VLAN routing, then the PPTP clients
are unable to access resources on VLAN 2.
If you checked the Enable box for the PPTP Server, save your settings. You can
add PPTP users only if you enabled the PPTP Server.
In the VPN Client Setting Table, perform these tasks:
• To add a client, click Add. Enter these settings:
- Enabled—For PPTP, check the box to activate the user account. Uncheck
the box to de-activate the user account. This setting is not applicable to
QuickVPN or XAUTH.
- Username—Enter the username for user authentication. For QuickVPN, it
must include at least 6 characters.
- Password—Enter the password for user authentication. For QuickVPN, it
must include at least 6 characters.
- Allow User to Change Password—Check the box if you want the user
to be able to change the password. Otherwise, uncheck the box.
- Protocol—Choose the type of user:
QuickVPN—The user uses the Cisco QuickVPN client and is
authenticated by the VPN server.
PPTP—The user is authenticated by a PPTP server.
XAUTH—The user is authenticated by an external authorization server,
such as a RADIUS server.
• To edit a client, check the box and then click Edit. To select all entries, check
the box in the heading row. Then edit the information, as described above.
• To delete a client, check the box and then click Delete. To select all entries,
check the box in the heading row.
Click Save to save your settings, or click Cancel to reload the page with the
current settings.
.
5
120