Cisco RV180 Administrator's Manual page 22

Introduction
Connecting the Equipment
STEP 5
!
CAUTION
STEP 6
STEP 7
Cisco RV180/RV180W Administration Guide
Connect the power adapter to the Cisco RV180/RV180W power port (12VDC).
Use only the power adapter that is supplied with the device. Using a different
power adapter could damage the device.
Plug the other end of the adapter into an electrical outlet. You may need to use a
specific plug (supplied) for your country.
On the Cisco RV180/RV180W, push in the ON/OFF power button.
The power light on the front panel lights up green when the power adapter is
connected properly and the unit is turned on.
1
13