Lpu Leds - HP 10504 Installation Manual

NOTE:
When the RUN LED flashes four times per second, the card is loading software. If the indicator flashes
•
in this state continuously, the card is not compatible with the switch software.
The ALM LED for an LPU lights for a period of time at the initial phase of the system startup.
•
MPU active/standby status LED
Each MPU has one ACTIVE LED to indicate the active or standby status of the MPU.
Table 42 MPU ACTIVE LED description
LED status
On
Off

LPU LEDs

RJ-45 Ethernet port LED
Each RJ-45 Ethernet port has one LED to show link status and activities.
Table 43 RJ-45 Ethernet port LED description
LED status
Flashing yellow
Flashing green
Steady yellow
Steady green
Off
SFP port LED
Each SFP port has one LED to show link status and activities.
Table 44 SFP port LED description
LED status
Flashing
On
Off
SFP+ port LED
Each SFP+ port has one LED to show link status and activities.
Description
The MPU is active.
•
The MPU is in standby status.
•
The MPU is faulty. Examine the card LED for an MPU problem.
Description
The Ethernet port is receiving or sending data at 100/1000 Mbps.
The Ethernet port is receiving or sending data at 10 Gbps.
A 100/1000 Mbps link is present.
A 10 Gbps link is present.
No link is present.
Description
The SFP port is receiving or sending data.
A link is present.
No link is present.
82