HP 10504 Installation Manual: Fan Tray Status Leds

10500 switch series.
Hide thumbs

Advertisement

Table 49 Switching fabric module LED description
RUN LED
Flashing (0.5 Hz)
Off
Flashing (0.5 Hz)
Off
On

Fan tray status LEDs

Each fan tray has one OK LED and one FAIL LED to indicate its operating status.
Table 50 Fan tray LED description
OK
On
Off
Off
Power supply LEDs
The HP 10500 2500W AC Power Supply has one AC LED and one DC LED to indicate its operating
status.
The HP 10500 2400W DC Power Supply has one INP OK LED and one DC/FLT LED to indicate its
operating status.
Table 51 2500W AC power supply LED description
LED
AC
DC
ALM LED
Off
On
On
Off
Off
FAIL
Off
On
Off
Color
Description
The power supply has no power input.
Off
The input voltage is too low, and the power supply is in self protection state.
Green
The power input is correct.
Green
The power supply is outputting power correctly.
The power supply is experiencing an output problem, including output
Red
short-circuit, output overcurrent, output overvoltage, input under-voltage, or
remote power off, and has entered the self protection state.
The power supply is in an over-temperature condition and has entered the self
Orange
protection state.
Description
The switching fabric module is operating correctly.
The switching fabric module is faulty.
The temperature of the switching fabric module has exceeded the
upper or lower limit.
The switching fabric module has not started.
The switching fabric module is up.
Description
The fan tray is operating correctly.
The fan tray is faulty.
The fan tray is not powered on.
84

Advertisement

This manual also for:

10508-v, 10508, 10512

Comments to this Manuals

Symbols: 0
Latest comments: