Installing A Cfp Module; Connecting An Sfp+/Qsfp+/Qsfp+ To Sfp+ Cable - HP 10504 Installation Manual

4. Connect the fiber to the module. For the installation procedure, see
network."
Figure 26 Installing an XFP/SFP+/SFP/QSFP+ module

Installing a CFP module

1. Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded. For
more information, see
2. Unpack the CFP module. Do not touch the golden plating of the module.
3. Holding both sides of the module, gently push the module into the slot until it has firm contact with
the slot. See
4. Fasten the captive screws.
5. Connect the fiber to the module. For the installation procedure, see
network."
Figure 27 Installing a CFP module
(1) Gently push the module into the slot.

Connecting an SFP+/QSFP+/QSFP+ to SFP+ cable

Use SFP+ cables to connect SFP+ ports, QSFP+ cables to connect QSFP+ ports, and QSFP+ to SFP+
cables to connect QSFP+ and SFP+ ports. All these cables are hot swappable.
To connect an SFP+, QSFP+, or QSFP+ to SFP+ cable:
"Attaching an ESD wrist
Figure 27.
strap."
(2) Fasten the captive screws.
29
"Connecting your switch to the
"Connecting your switch to the