HP 10504 Installation Manual page 21

Figure 10 Attaching cable management brackets to a 10504
(1) Attach the cable management bracket to the chassis.
(2) Mounting holes for installing the cable management bracket.
(3) Screws for attaching the cable management bracket to the chassis.
(4) Power cord management bracket (installed at the lower part of the chassis).
Attaching mounting brackets to the chassis
1. Identify the left mounting bracket (marked L) and the right mounting bracket (marked R) on the inner
surface of the mounting brackets.
2. Facing the chassis front, mount the left and right mounting brackets to the two sides of the chassis,
as shown in
Figure 11 Installing the mounting brackets (10508)
1
(1) Screws for attaching the mounting brackets to the chassis
(2) Mounting brackets
(3) Signal cable management brackets
Figure 11.
3
2
3
2
15
1